The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Double-sided different film Film thickness design, wet film thickness 150/200μm, Spreader width 80mm, wear-resistant corrosion-resistant alloy steel material, suitable for a variety of materials experimental film preparatory.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
Made of 9Cr18Mo High Hardness Stainless Steel, Hardness up to 50-55HRC, with +/- 2μm accuracy and 4-sided film design, supports 37μm, 50μm, 75μm, 100μm Film thickness options.
The 4-sided structure can prepare 12 kinds of film thickness, the wet film thickness range is 30-100μm, the accuracy is +/- 2μm, the application width is not less than 60mm, and the coating does not spill during the Moulding process.
Double-sided design can be completed at one time, using CR12 molybdenum vanadium material to improve corrosion resistance, wet film thickness of 300-400μm, effective application width of 80mm.
Cube Applicator can achieve 70/150μm double-sided Film thickness Spreader, through the hardening process to ensure that the overall uniform hardening, Spreader width 12mm, guide plate design for narrow Glass panel direct use.
The 4-sided design can complete different thickness films at one time, using wear-resistant and corrosion-resistant stainless steel material, film thickness 150-300μm, application width 105mm, can accurately control wet-film or dry-film thickness.
The 4-sided design can be scraped with four thicknesses at one time, the film thickness is precisely controlled from 5μm to 20μm, the stainless steel material is wear-resistant and corrosion-resistant, and the application width is 150mm to meet various experimental needs.
The 4-sided design can be prepared with four film thicknesses, application width 80mm, stainless steel material, suitable for water-based, acidic and alkaline pRoducts, high film accuracy and small size.
Made of stainless steel, acid and alkali erosion resistance; 4-sided design can provide 30/60/90/120μm four film thickness, application width 80mm, operation only need to change the angle to quickly switch film thickness.
