Vacuum heating drying technology, Vacuum Level up to -0.098MPa, pumping 80-120 liters/min, drying time is only 4-6 minutes, with intelligent PID temperature control and over-temperature alarm function, easy and safe operation.
Internal heating technology shortens the heating time by 50%, the vacuum environment can be reduced to 133Pa, the aluminum shelf conducts heat quickly and reduces heat loss, double-decked Glass doors are easy to observe, and support inert gas protection to prevent oxidation.
The digital vacuum Gauge is used to automatically control the Vacuum Level, with an accuracy of +/- 1%; the heating element is located in the Shelf of the box to shorten the heating time by 50%; the special aluminum shelf conducts heat quickly and does not oxidize at high temperature, effectively improving the drying efficiency.
With programmed vacuum cycle control, the maximum number of cycles is 99 times, and the drying time is shortened by more than 50% compared with the traditional method; equipped with a digital vacuum Gauge, the control accuracy is +/- 1% to ensure a stable vacuum environment.
Internal heating design shortens heating time by 50%, vacuum environment can quickly dry heat sensitive substances and avoid oxidation, Studio Temperature Fluctuation +/- 1 ℃, equipped with tempered Glass door for easy observation.
Equipped with programmed vacuum cycle function, drying time is shortened by more than 50%, temperature control accuracy +/- 1 ℃, support 7 groups of 63-step Program settings, digital Vacuum Level control accuracy +/- 1%.
Cuboid Studio improves volume utilization, drying time is reduced by more than 40% compared with traditional Vacuum Chamber, Temperature range RT + 10~ 200 ℃, Vacuum Level up to 133Pa, double-decked Glass door is easy to observe.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
The vacuum environment effectively reduces the boiling point of the liquid and prevents the analysis of heat-sensitive substances; the Vacuum Level < 133Pa ensures efficient drying; the microcomputer PID control realizes accurate temperature control; the multi-layer independent heating system makes the temperature distribution more uniform.
Vacuum environment significantly reduces the boiling point of liquid, suitable for heat-sensitive substances; drying Temperature range RT + 50~ 200 ℃, Vacuum Level < 133Pa; inert conditions prevent oxide explosion, powder sample stability does not move.
The vacuum environment can reduce the boiling point of the liquid to 133Pa, effectively shorten the drying time of the powder sample; the inert condition eliminates the risk of oxide explosion, and the independent heating design ensures temperature uniformity.
The digital pressure sensor is used to automatically control the Vacuum Level with accuracy +/- 1%; the programmed vacuum cycle can shorten the drying time by more than 50%; 7 groups of 63-step programmable temperature control support slope mode to achieve accurate heating and cooling rate control.
Vacuum environment can reduce the boiling point of liquid to less than 133Pa, effectively shorten the drying time of powder samples; inert conditions eliminate the risk of oxide explosion, independent heating tube design supports delamination temperature control, to ensure Temperature uniformity.
Cuboid studio improves volume utilization, drying time is reduced by more than 40%; Temperature range RT + 10~ 200 ℃, Vacuum Level 133Pa; double-decked Glass door is easy to observe, can be filled with inert gas anti-oxidation, stainless steel liner is durable and easy to clean.
Vacuum environment is used to reduce the boiling point of liquid, suitable for drying heat-sensitive substances; studio volume 500L, temperature control accuracy +/- 1 ℃, equipped with stainless steel liner and aluminum shelf to ensure uniform heating and anti-oxidation treatment.
