Measurement range 0-18mm, contact pressure 100kPa, contact area 200mm ², Indication Error 2.5μm, suitable for accurate measurement of paper and Cardboard thickness.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200mm ², with High Accuracy Indication Error +/- 0.0025mm, suitable for all kinds of sheet material thickness measurement.
Measurement range 0-4mm, contact pressure 100 +/- 10kPa, contact area 200 +/- 5mm ², with High Accuracy Indication Error +/- 0.0025mm and stable parallelism ≤ 0.002mm, suitable for a variety of material thickness detection.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
Measurement accuracy of 0.007mm, Graduation of 0.001mm, probe diaMeter Φ 5mm, maximum measurement depth 45mm, suitable for on-site rapid thickness detection.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
Automatic test with microcomputer control, contact pressure 100 +/- 10kPa, contact area 200 +/- 5mm ², Measurement accuracy up to 0.001mm, suitable for continuous and accurate Film thickness determination.
Dedicated to Coating thickness Gauge calibrating, ensure accurate thickness measurement, suitable for F type equipment, improve Reliability.
Measurement accuracy of 0.007mm, Graduation of 0.001mm, probe diaMeter of Φ 5mm plane, maximum measurement depth of 80mm, in line with national standards.
Measurement range 0~ 1250μm, suitable for LEEB220 and LEEB222 Coating thickness Gauge, Abrasion Resistance is good, suitable for a variety of nonmagnetic Coating thickness detection.
Pressure adjustable range -1 to + 1mm, proofing speed support 400-700rpm three-speed frequency conversion speed regulation, uniform ink time 15-800 seconds adjustable, fixed structure to ensure proofing Stability.
Measurement range 0-4mm, resolution 0.001mm, contact pressure 100 +/- 10kPa, measurement plane parallelism ≤ 0.0005mm, in line with a number of international standards, suitable for a variety of sheet material thickness accurate determination.
Travel 0-1.25 mm, measurement error +/- 1HAM, pressure at the end of the needle 324-764mN, suitable for thin rubber samples with a thickness of 1.5mm or more, and can be used with a fixed load measuring rack.
Measurement range 0-20mm, resolution 0.01mm, contact pressure 20 +/- 0.5kpa to ensure Measurement accuracy, in line with a number of international standards, suitable for all kinds of sheet material thickness detection.
Equipped with fixed load weight and adjustable horizontal table, column lifting space ≤ 140mm, using Glass table anti-rust wear, can accurately adjust the level of the platform, improve the test Repeatability and accuracy.
