Adopt servo electric printing pressure system, printing pressure 0-4mm automatic adjustment, printing speed 0-100 Meters can be set, support low accuracy overprint, simulate Gravure Printing drawdown blade Installation method, easy to detect inks.
Operating Pressure 0-5MPa adjustable, PID intelligent temperature control accuracy +/- 3 ℃, hydraulic system with long-term pressure holding function, press plate Travel 200mm, suitable for hot pressing and hot calendering experiments, to meet the QB/T3703-1999 standard requirements.
The printing speed is 0~ 260m/min, the accuracy is less than 0.5, which supports data management and characteristic detection, and can reduce the number of proofing and material waste.
Horizontal press measurement combined with a physical positioning observation window, with repeatability accuracy dE*ab ≤ 0.02. It supports 5 measurement apertures and over 30 measurement parameters, and enables color data sharing through a mobile application.
Equipped with High Accuracy Servo Motor, uniform ink speed adjustable 0-300rpm, pressure 0 to 1kpa pneumatic adjustment, using circular embossing method to improve fit, support quick replacement of anilox roller.
Adopt circular embossing method to improve the fit, the proofing speed is adjustable from 0-300rpm, equipped with High Accuracy Servo Motor and quick replacement anilox roller system, support a variety of gray scale customization.
Slot-die Spreader and gravure coating dual function design, Spreader thickness range of 0.005-3mm, drying temperature up to 200 ℃, bonding accuracy of 0.5mm, suitable for a variety of non-elastic materials stable composite and Spreader processing.
The thermostat is used to control the heat transfer of the heating tube, the temperature accuracy is +/- 2 ℃, and the heating range is adjustable from room temperature to 250 ℃; it is equipped with light curtain protection device and temperature abnormal alarm function, and the operation is safe and reliable; the parallelism of the upper and lower templates is within 0.05 to ensure uniform pressure.
Pneumatic pressure mode, low noise and easy to adjust, Operating Pressure 0~ 0.9MPa adjustable, cylinder diaMeter 63mm, nominal force 45~ 80Kg, lightweight structure, comfortable operation.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Four-speed proofing speed is optional, up to 45m/min, using flat engraving plate for direct printing, supporting 95 × 149mm concave sample range, suitable for fast proofing of flexible substrates.
Using electric pressure system, the printing pressure is adjustable from 0 to 2mm, the speed range is 0 to 80 Meters, low accuracy overprinting is supported, and the computer program control operation is stable.
Adopt gear pair drive, hand-pressed operation, rated load 500N, Travel 70mm, the upper and lower height of the frame can be adjusted, Force Gauge has a positioning structure, suitable for batch testing.
Horizontal press measurement with physical positioning observation window, Repeatability accuracy up to dE * ab ≤ 0.02, support 5 measurement diaMeters and over 30 Measurement paraMeters, equipped with full band equalization LED Illuminant, Measurement time of about 1 second.
Intrinsically safe explosion-proof design, up to CT4 grade, equipped with explosion-proof Sensor and display. Table size 410x510mm, weighing range 110kg, accuracy 10g, stable structure, support external calibrating and a variety of functions.
