CATEGORIES

    Small Hot Air Circulating Oven

    Overview Products Knowledge Standards Terms
    The small hot air circulation oven drives hot air to circulate inside the chamber through a fan, ensuring uniform heating of samples. It is used for drying and curing materials such as coatings and plastics in laboratories, and is suitable for rapid drying tests of small-batch samples.
    Selection
    When selecting, consider matching the sample characteristics with the temperature range, ensuring the chamber size meets placement requirements, the temperature control accuracy complies with experimental needs, the materials are corrosion-resistant and easy to clean, fan noise does not affect the environment, and energy consumption aligns with the spatial layout.
    Style
    Product Type
    Principle
    Airflow Direction
    Temp Range
    temperature resolution
    volume
    Heater Type
    Chamber Material
    Temp Fluctuation
    Temp Uniformity
    Safety Protection

    Terms

    Super Constant Temperature Oil Bath
    Chlorine Dioxide Detector
    Transparent Constant Temperature Water Bath
    Low Temperature Constant Temperature Water Bath
    Constant temperature oil bath
    Dry Type Low Temperature Thermostat
    Cooling Thermostatic Bath
    Freezing Compressor
    Oven
    Transparent Refrigerated Constant Temperature Bath

    Standards

    Active GB/T 41931-2022
    Plastics/rubber—Polymer dispersions and synthetic rubber latices—Freeze-thaw cycle stability test
    Active GB/T 13477.14-2019
    Test method for building sealants－Part 14：Determination of resistance to prolonged exposure to water
    Active GB/T 41753-2022
    Test method for durability to extension compression cycling under accelerated weathering for sealants
    Active GB/T 42261-2022
    Metallic and other inorganic coatings—Test method of cyclic heating for thermal-barrier coatings under temperature gradient
    Active GB/T 24131.1-2018
    Rubber, raw—Determination of volatile matter content—Part 1:Hot-mill method and oven method
    Active GB/T 2317.3-2008
    Test method for electric power fittings - Part 3: Heat cycle tests for electric power fittings
    Active GB/T 23711.5-2019
    Test method for pressure vessels lined with plastics—Part 5:Cold-hot cycling inspection
    Active GB/T 13477.12-2018
    Test method for building sealants－Part 12：Determination of adhesion/cohesion properties at constant temperature
    Active GB/T 9966.2-2020
    Test methods for natural stone—Part 2:Determination of dry,wet and after freezing flexural strength
    Active GB/T 9966.1-2020
    Test methods for natural stone—Part 1:Determination of dry,wet and after freezing compressive strength
    Active GB/T 13477.23-2022
    Test method for building sealants—Part 23：Durability to extension compression cycling under accelerated weathering
    Active GB/T 2423.4-2008
    Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat，cyclic ( 12h+12h cycle)
    Active GB/T 26809-2011
    Thermostatic baths and circulators - Refrigerated circulators
    Active GB/T 26808-2011
    Thermostatic baths and circulators - Refrigerated baths
    Active GB/T 28853-2012
    Thermostatic baths and circulators - Heated circulators

    Instruments

    BENTING CBGLL-65BE Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGLL-65BE Blast Drying Oven vertical double air duct vertical hot air circulation

    Vertical double air duct vertical hot air circulation design, temperature uniformity +/- 1.0 ℃, variable speed fan can adjust the air volume, large screen LCD display, independent temperature limit alarm system to ensure safe operation.

    $ 1009.00
    YIHENG DHG-9030A Drying Oven blast Drying Oven hot air circulation temperature uniform
    YIHENG DHG-9030A Drying Oven blast Drying Oven hot air circulation temperature uniform

    Adopt hot air circulation system to ensure Temperature uniformity, Temperature Fluctuation +/- 1 ℃, volume 30L, with over temperature deviation protection and timing function, can adjust the air inlet and exhaust volume.

    $ 453.00
    BENTING CBGLL-45BE Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGLL-45BE Blast Drying Oven vertical double air duct vertical hot air circulation

    Vertical double air duct vertical hot air circulation design to ensure uniform temperature distribution, speed control fan can adjust the air volume according to experimental needs, Inner Chamber dimensions 350 × 350 × 350mm, volume 42L, with independent temperature limit alarm system and paraMeter memory function.

    $ 925.00
    BENTING CBGLL-230BE Blast Drying Oven vertical double air duct hot air circulation 225L
    BENTING CBGLL-230BE Blast Drying Oven vertical double air duct hot air circulation 225L

    Vertical double air duct vertical hot air circulation to ensure temperature uniformity, speed control fan can adjust the air volume to avoid blowing powder items, Temperature range RT + 10-300 ℃, studio volume 225L, equipped with independent temperature limit alarm system to ensure experimental safety.

    $ 1474.00
    BENTING CBGL-45B Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-45B Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation, Temperature Fluctuation +/- 1.0 ℃, Inner Chamber dimensions 350 × 350 × 350mm, equipped with PID microcomputer intelligent temperature control instrument and adjustable speed fan to ensure uniform and stable temperature.

    $ 683.00
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-420BT Electric Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation, temperature control accuracy +/- 1.0 ℃, Temperature resolution 0.1 ℃, with timing and over-temperature alarm function, turbine centrifugal fan blade with bottom drum and bottom heating to ensure Temperature uniformity.

    $ 1719.00
    BENTING CBGL-65B Blast Drying Oven vertical double air duct vertical hot air circulation
    BENTING CBGL-65B Blast Drying Oven vertical double air duct vertical hot air circulation

    Adopt vertical double air duct vertical hot air circulation technology, Temperature Fluctuation +/- 1.0 ℃, studio volume 65L, equipped with turbine centrifugal fan blades and PID intelligent temperature control to ensure uniform temperature distribution and accurate temperature control.

    $ 751.00
    BENTING CBGL-230B Blast Drying Oven Vertical double air duct hot air circulation PID temperature control
    BENTING CBGL-230B Blast Drying Oven Vertical double air duct hot air circulation PID temperature control

    Vertical double air duct vertical hot air circulation to ensure temperature uniformity, temperature control accuracy of +/- 1.0 ℃, turbine centrifugal fan blade with the drum design, fan speed adjustable, studio mirror stainless steel easy to clean.

    $ 1248.00
    BENTING CBGLL-30BE Blast Drying Oven vertical double air duct vertical hot air circulation 0.8kw
    BENTING CBGLL-30BE Blast Drying Oven vertical double air duct vertical hot air circulation 0.8kw

    Vertical double air duct vertical hot air circulation design to ensure uniform temperature distribution, Inner Chamber dimensions 310 × 310 × 310mm, variable speed fan can adjust the air volume, large screen LCD display multiple sets of data, with paraMeter memory and over-temperature alarm function.

    $ 832.00
    BENTING CBGLL-625BE Blast Drying Oven vertical double air duct hot air circulation 225L
    BENTING CBGLL-625BE Blast Drying Oven vertical double air duct hot air circulation 225L

    Vertical double air duct vertical hot air circulation to ensure uniform temperature distribution, temperature control accuracy of +/- 1.0 ℃, equipped with large screen LCD display and independent temperature limit alarm system, support 1-9999 minutes timing function, effectively ensure the safe and stable operation of the experiment.

    $ 3410.00
    BOZHEN DHG-9070A vertical blast Drying Oven stainless steel liner hot air circulation
    BOZHEN DHG-9070A vertical blast Drying Oven stainless steel liner hot air circulation

    Temperature range RT + 10~ 250 ℃, Temperature Fluctuation +/- 0.5 ℃, hot air circulation system to ensure uniform temperature in the studio, optional RS485 interface to record temperature and humidity paraMeters.

    $ 483.00
    BOZHEN DHG-9920A vertical blast Drying Oven stainless steel liner hot air circulation
    BOZHEN DHG-9920A vertical blast Drying Oven stainless steel liner hot air circulation

    Temperature range RT + 10~ 250 ℃, Temperature Fluctuation +/- 0.5 ℃, using hot air circulation system to ensure uniform temperature in the studio, with independent temperature limit alarm and RS485 interface optional function.

    $ 3170.00
    BOZHEN DHG-9035A vertical blast Drying Oven stainless steel liner hot air circulation
    BOZHEN DHG-9035A vertical blast Drying Oven stainless steel liner hot air circulation

    Temperature range RT + 10~ 300 ℃, Temperature Fluctuation +/- 0.5 ℃, hot air circulation system to ensure uniform temperature, with timing function and independent temperature limit alarm, support RS485 interface to record data.

    $ 419.00
    BENTING CBGL-30B Blast Drying Oven vertical double air duct vertical hot air circulation 0.8KW heating power
    BENTING CBGL-30B Blast Drying Oven vertical double air duct vertical hot air circulation 0.8KW heating power

    Vertical double air duct vertical hot air circulation design, high temperature uniformity, temperature control accuracy of +/- 1.0 ℃, studio volume 30L, equipped with turbine centrifugal fan blades and low noise blower, fan speed regulation, easy operation and maintenance.

    $ 603.00
    BENTING CBGL-125B Blast Drying Oven vertical double air duct vertical hot air circulation PID temperature control
    BENTING CBGL-125B Blast Drying Oven vertical double air duct vertical hot air circulation PID temperature control

    Vertical design with bottom drum and bottom heater, turbine centrifugal fan blade to achieve vertical hot air circulation, Temperature Fluctuation +/- 1.0 ℃, studio volume 125L, PID microcomputer intelligent temperature control to ensure uniform and stable temperature.

    $ 958.00

    Articles

    Application of High-Frequency Fatigue Testing Machine in Infinite Life Testing of Valve Springs
    This article discusses the application of high-frequency fatigue testing machines in the infinite life testing of valve springs. The test simulates the long-term working stress of the spring through high-frequency cyclic loading, with parameters such as preload, amplitude, and cycle count set according to international standards.
    Constant temperature bath selection: circulation method and temperature control range.
    This article on thermostatic bath selection primarily analyzes two core factors: circulation mode and temperature control range. The circulation mode is divided into natural convection and forced circulation, where the former is suitable for simple static experiments, while the latter offers higher precision and is better suited for multiple samples or integration with external devices.
    Rapid temperature change high and low temperature test chamber for thermal fatigue evaluation of PCB board solder joints.
    This paper discusses the application of rapid temperature change high and low temperature test chambers in evaluating the thermal fatigue of PCB board solder joints. Solder joint fatigue is primarily caused by differences in material thermal expansion, and the test chamber simulates thermal stress through temperature cycling to accelerate the fatigue process.
    Application of Three-Chamber High and Low Temperature Test Chambers in Rapid Temperature Cycling for Electronic Products
    The three-chamber high-low temperature test chamber is used for reliability testing of electronic products, enabling rapid temperature transitions through independent high temperature, low temperature, and test zones. Compared to traditional single-chamber equipment, it reduces temperature change time and enhances testing efficiency.
    The Impact of Cooling Circulating Water Chillers on the Temperature Stability of Digesters
    The cooling circulator helps maintain a stable temperature for the digester by circulating the cooling medium, thereby improving the repeatability of experiments. Its working principle involves using a refrigeration system to lower the water temperature, and then circulating the cooled water to the digester through a circulation pump to absorb excess heat.
    Effect of Rapid Temperature Change Aging Chamber on Thermal Cycling of Composite Materials
    This article primarily explores how rapid thermal cycling chambers affect the performance of composite materials during thermal cycling. It explains that thermal cycling can induce internal stresses in composite materials due to differences in the thermal expansion coefficients of their components, potentially leading to microcracks or performance degradation.
    Salt spray aging test chamber for cyclic corrosion evaluation of coating weatherability.
    This article introduces the method of using a salt spray aging test chamber to conduct cyclic corrosion tests for evaluating the weather resistance of coatings.
    Research on the Stepwise Curing Process of Coatings Using Multi-Stage Temperature Control Ovens
    This article investigates a novel process for achieving stepwise curing of coatings using a multi-stage temperature-controlled oven.
    Tensile testing machine measures the bending fatigue life of flexible OLED films.
    This article introduces a method for testing the bending fatigue life of flexible OLED films using a tensile testing machine. The test simulates repeated bending to evaluate the accumulation of damage in the film under cyclic stress, and monitors performance changes to determine the failure point.
    Fatigue testing machine evaluates the long-term durability of resin-based composite materials.
    The fatigue testing machine is a key piece of equipment for evaluating the long-term durability of resin-based composite materials. These materials are widely used in fields such as aerospace, but their performance gradually degrades under cyclic loading.
    The Taber Abraser evaluates the wear resistance of coatings.
    The Taber abrasion tester simulates surface wear of materials through rotational friction, used to evaluate the wear resistance of coatings. During testing, a grinding wheel is used to rub the specimen under a fixed load, and performance is quantified by measuring mass loss or thickness changes after a specified number of cycles.
    Evaluation of thermal aging life of hot melt adhesives using high-temperature oven method
    This article introduces a method for evaluating the thermal aging life of hot melt adhesives using a high-temperature oven. The principle is based on the Arrhenius equation, where aging is accelerated by increasing the temperature to simulate performance changes under long-term use.
    Thermogravimetric Analyzer for Determining the Solid Content of Coatings
    Thermogravimetric analyzers determine the solid content of coatings by monitoring the change in sample mass with temperature, offering faster and more precise results compared to traditional oven methods.
    UV aging test machine evaluates the UV resistance of ink.
    This article introduces how to test the UV resistance of ink using a UV aging test chamber. The equipment accelerates aging by simulating ultraviolet light and controlling temperature and humidity, with key testing conditions including temperature, irradiance, and cycle time.
    What is the deviation between the moisture meter's rapid moisture measurement and the oven method?
    This article primarily compares the differences between rapid moisture analyzers and traditional oven methods in measuring moisture. Understanding these differences helps in using rapid moisture analyzers more appropriately, ensuring data reliability while maintaining efficiency.