The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Irreversible Color change for long-term temperature recording; Resistant to oil, water and steam; Temperature accuracy is +/- 1 ° C below 100 ° C and +/- 1.5 ° C from 100 ° C to 154 ° C; Self-adhesive design for easy use and storage.
Vertical double air duct vertical hot air circulation design to ensure Temperature uniformity +/- 1 ℃, turbine centrifugal fan blades with bust system, adjustable shelf spacing, equipped with double-decked tempered Glass observation window and high temperature sealing strip.
Microcomputer temperature control technology, Temperature Fluctuation +/- 1%, Vacuum Level < 133Pa, equipped with high temperature silicone rubber sealing strip and tempered Glass door, support inert gas filling, suitable for heat sensitive material drying.
Adopt microcomputer temperature control technology, temperature control accuracy +/- 1% ℃, Vacuum Level < 133pa, equipped with tempered Glass door and silicone sealing strip, support inert gas filling, suitable for rapid drying of complex ingredients.
The ElectRode is a composite design with a 60mL reference filler and calibrating solution combined with an ionic strength modifier for accurate measurement of Cu Ion concentration and comes with a polishing strip for easy maintenance.
ElectRode composite structure, equipped with 60mL reference filling solution and calibrating solution, built-in ionic strength modifier, support accurate lead Ion concentration measurement, matching polishing strip for easy maintenance.
Adopt magnetic Induction principle to measure 0-1250μm thickness, equipped with line Probe measurement groove and narrow area, support single point and two point calibrating, with automatic matrix recognition and undervoltage prompt function.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
Imported special steel pressure needle, Hardness and long life, range 0-20HW, can directly read the Hardness value, suitable for on-site rapid testing, Stability and portability.
Pure white paper surface sealed, size 194x286mm, ASTM standard, support hiding power measurement and levelling sag test, matching Applicator Rod can obtain uniform coating results.
The device can precisely control the thickness of the ink layer, the minimum Basis Weight unit is 0.0012CC, and the compact size is φ 20 * 180mm, which is convenient for inks comparison and color concentration detection.
Using magnetic Induction and eddy Current dual principle, Measurement range 0~ 1250μm, Probe with line can measure grooves and complex positions, automatically identify iron and non-iron substrates, with single point and two point Adjustment.
