Adopt multi-stage programmable controller, preset 7 groups of 63-step program, Temperature Fluctuation +/- 1 ℃, mirror stainless steel liner for easy cleaning, independent temperature limit alarm system to ensure safe operation.
Multi-stage programmable controller, support 7 groups of 63-step Program settings, Temperature Fluctuation +/- 1 ℃, with mirror stainless steel liner and independent temperature limit alarm system to ensure the safety and stability of the experimental process, Thermal Power is reduced by more than 25% compared with traditional equipment.
With multi-stage programmable controller, 7 sets of 63-step programs can be preset, Temperature Fluctuation +/- 1 ℃, mirror stainless steel liner for easy cleaning, independent temperature limit alarm system to ensure safe operation.
Mirror stainless steel liner for easy cleaning, multi-stage programmable controller supports 7 groups of 63 step Program settings, Temperature Fluctuation +/- 1 ℃, with independent temperature limit alarm and energy saving design, Thermal Power is reduced by more than 25%.
The use of low-energy centrifugal fans makes the airflow uniform and stable, with an average wind speed of 0.25 to 0.45m/s and noise less than or equal to 62dB (A). The mirror stainless steel countertop is corrosion-resistant and easy to clean, and the tripod and cabinet are separated for easy transportation.
With 30-stage programmable control function, the maximum temperature is 1000 ℃, the Furnace volume is 2L, the refractory brick Furnace and stainless steel material are used, and the heat loss is small and the Temperature uniformity is good.
Using 200g weight and 1cm ² bottom area design, in line with GB/T 1728 standard, through the filter paper test method to accurately determine the film surface drying and practical drying time, easy to operate, reliable results.
With 30 stages of multi-stage programmable control, the highest temperature 1200 ℃, Furnace volume 7L, using refractory brick Furnace and nickel-chromium wire heating elements, heat loss is small and Temperature uniformity is good.
Using 200 +/- 0.2 g weight and 1 square centiMeter bottom area design, the drying process of the paint film was accurately determined by the cotton ball method to distinguish between surface drying and actual stages in drying.
The circular track is used to automatically record the film drying process continuously, equipped with 4 kinds of specifications to choose from, the track diaMeter is 100mm, and the measurement error is +/- 0.5%, which can intuitively analyze the stages in drying state.
The cuboid studio improves the volume utilization rate, the Vacuum Level control range is 10~ 105Pa, the accuracy is +/- 1%, it is equipped with 7 sets of 63-step programmable functions, supports slope temperature control mode, and the drying time is shortened by more than 50% compared with the traditional method.
Double station design can process two samples at the same time, Vacuum Level up to -0.098MPa, drying time only 4-6 minutes, suitable for rapid drying of wet paper samples with a diaMeter of no more than 200mm.
Using arc surface drying plate design, the maximum temperature can reach 180 ℃, Heating power 2500W, the steam is quickly discharged during the drying process, easy to operate and maintenance-free.
Infrared heat source for fast drying, Power 550W, metal material to ensure durability, built-in heating element to pRoduce uniform heat cycle, effective evaporation of water, suitable for drying various materials.
Adopt multi-stage programmable PID controller and TMHM equilibrate Conditioning method, temperature control fluctuation high temperature +/- 0.5 ℃, humidity control deviation +/- 3% RH, with independent temperature limit alarm and 100 group program storage function.
