The surface of the three rollers is squeezed and rubbed at different speeds to achieve grinding. The roller is made of cold hard alloy steel, with a surface Hardness of HS70 ° or more, a fineness of grinding up to 15μm, and a capacity of 350Kg/h.
Adopting three-roll extrusion friction grinding principle, Rotation speed 28-152rpm adjustable, fineness of grinding up to 15μm, Hardness HS70 ° above the surface of cold hard alloy steel roller, support water chilling down system, suitable for high viscosity material processing.
The equipment set stirring, sand grinding, dispersing functions in one, using Minbu motor to achieve 0-2800rpm speed regulation, lift Travel 250mm, with small size, low noise and no carbon brush abrasion characteristics.
Adopt closed system design, mixing capacity 5-200G, Speed range 1500-3500rpm, can achieve fast and efficient Mix & disperse, the operation process is quiet, pollution-free and bubble-free, support manual and intelligent two control modes.
The device can quickly mix ground dispersed materials in a closed system, with a speed range of 1500-3500 rpm, a mixing capacity of 5-150G, and features bubble-free and quiet operation.
Three rollers are used to squeeze each other and friction at different speeds to achieve grinding. The roller material is cold hard alloy cast iron, with surface Hardness HS70 ° or more, and the fineness of grinding can reach 15μm, which is suitable for high viscosity material processing.
The surface of three rollers is extruded and rubbed at different speeds to achieve grinding. The diaMeter of the roller is 65mm, and the fineness of grinding can reach 15μm. It is suitable for fine grinding and dispersion of high viscosity materials.
Set stirring, dispersing, grinding three functions in one, motor Power 750W, processing viscosity of 100000mPa.s, using frequency control to achieve 60-8000rpm stepless speed regulation, through high-speed swirl/spin to pRoduce strong shear effect to achieve efficient mixing.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Equipment set stirring, sand grinding, dispersing multi-function in one, using dual-axis constant force automatic lifting system, lifting Travel 250mm, speed range 0-2800rpm, with small size, low noise, no carbon brush abrasion characteristics.
Rotation speed up to 3000rpm, fineness of grinding up to 10 microns or less, double-decked chilled down jacket design makes the conventional temperature rise less than 10 ℃, zirconia dial drive grinding medium to achieve efficient dispersion grinding.
Using 750W Motor Power, the speed range is 60-8000rpm, which integrates the three functions of stirring and dispersing grinding, and generates a strong shear force through high-speed swirling/spinning to achieve efficient Mixing & dispersing effect.
Rotation speed up to 3000rpm, fineness of ground up to 10 microns, equipped with double-decked chill down jacket to make the temperature rise less than 10 degrees, electric lifting design easy to operate and easy to clean.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
