Temperature control accuracy of +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the melt flow performance of polymers at high temperatures, to meet a variety of material testing needs.
Adopting MCU to adjust power and temperature control mode, temperature control accuracy +/- 0.5 ℃, with eight standard test force, can meet the needs of different material testing, suitable for melt flow performance measurement at high temperature.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Equipped with 8 Meters Oven, roller heating temperature up to 200 ℃, effective application width 500mm, Spreader thickness range 0.005-3mm, support automatic unwinding to winding process, suitable for hot-melt adhesive film.
Temperature range 50~ 400 ℃, thermostatic accuracy +/- 0.5 ℃, equipped with eight standard test force, can accurately determine the flowability and viscosity of polymers in molten state and other physical properties.
Adopt all-electric control without external air source, Spreader thickness range 0.01mm to 2mm, Spreader speed 2-4.5 m/min adjustable, with quick-release plastic groove and precision tension control, suitable for paper, film and other substrates.
Adopt High Accuracy modular Spreader station structure, all-electric control without external air source. The minimum thickness of Spreader can reach 0.01mm, the maximum Spreader width is 300mm, the Spreader speed is adjustable 2-4.5 m/min, and it has an electronically controlled precision tension system to adapt to different materials such as paper and plastic film.
Adopt electric push Rod to drive Spreader movement, adjustable speed range of 2-200mm/s, temperature accuracy +/- 3 ℃, support Vacuum chuck and electric heating function, improve Spreader uniformity and operation convenience.
Using Hastelloy heating cylinder to avoid high temperature oxidation, dual Sensor temperature control accuracy of +/- 0.5 ℃, support strong corrosion plastic test, with four minutes countdown and RS232 data output function.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
The thickness range of Spreader is 0.01mm~ 2mm, the minimum gluing thickness is 0.01mm, the coating surface density ≤ +/- 1.5%, the dial Meter is used to fine-tune the gap and the Teflon baffle to adjust the width, and it supports forward and reverse continuously variable speed and automatic winding.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
With a 45 ° test angle and an adjustable speed of 5mm/sec, equipped with a 500g weight and a standard pencil set, stable and low-noise electric control is achieved through a stepper motor.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
