Winding speed 1-20R/min adjustable, free tension 25N-250N stepless adjustment, support 2-5mm diaMeter wire test, maximum output torque 40N.m, to meet the needs of different wire diaMeter detection.
The equipment adopts dual-station synchronous unwinding and thermostatic hot pressing technology, the bonding speed is adjustable from 2-10m/min, the hot pressing temperature is room temperature to 200 ° C, the line pressure is 5-50N/mm, and it is equipped with automatic deviation correction and full closed-loop tension control to ensure the material alignment accuracy and stable winding.
With 0.001N.m torque resolution and ≤ +/- 0.5% force value error, support preset force value and angle mode, real-time display of stiffness and automatic calculation of statistical pass rate, suitable for a variety of torsion test requirements.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
The equipment supports 400mm maximum Spreader width, Spreader thickness 0.01-2 mm adjustable, with forward and reverse stepless speed change and automatic winding function. The rubber groove and upper rubber wheel can be quickly disassembled and cleaned to adapt to different material tension control needs.
The 7-inch Touchscreen is easy to operate, with a torque resolution of 0.001N.m, supports six unit swaps, can set 5 test points and display stiffness in real time, and has a maximum peak test mode to record the fracture value of the sliding tooth.
With +/- 1% accuracy and 0.1 ° angle Graduation, it supports real-time stiffness display and 10 sets of data storage analysis, and the manual loading method is suitable for Φ 100mm rotary diaMeter specimens.
With +/- 1% measurement accuracy and 0.1 ° angle resolution, supports real-time stiffness display and 10 sets of data storage analysis, manual loading mode can meet the needs of -3000 ° to + 3000 ° swirl/spin testing.
With +/- 1% accuracy and 0.1 ° angle resolution, it supports real-time stiffness display and 10 sets of data storage analysis, and the swirl/spin range up to +/- 3000 ° meets a variety of test requirements.
Sampling speed up to 1920Hz, accuracy level 1, support three test modes and 99 sets of data storage, with upper and lower limit judgment and automatic shutdown function, suitable for high speed Impact torsion detection.
Rotation speed control is accurate and synchronization performance is good; the height of the casting roller can be adjusted to adapt to different solution strength materials; the surface finish of the hard chrome-plated mirror roller is high, and it is equipped with a circulating water chilling down system. Temperature control accuracy +/- 1 ℃.
Using 7-inch touch LCD screen, the test direction is clearly displayed, and three units are automatically interchanged. 5 test points and 10 test items can be customized, and the stiffness can be displayed in real time. The swirl/spin range is -3000.0~ + 3000.0 °, and the accuracy is +/- 1%.
With 0.001N.m torque resolution, support 1-3000 ° swirl/spin range adjustable, provide real-time stiffness display and 10 sets of Data storage functions, can set qualified interval judgment and maximum peak test mode.
With 0.0001N.m torque resolution and ≤ +/- 0.5% force value relative error, supports two measurement modes of preset force value and angle, can display stiffness in real time and automatically calculate statistical test data, suitable for a variety of torsional performance tests.
With 1000N.mm range and +/- 1% accuracy, it can test real-time stiffness and segmented stiffness. The large 7-inch Touchscreen supports custom test points, USB communication is convenient for data export processing, and the swirl/spin range is -3000~ + 3000 ° to meet various test needs.
