The thickness of the pressurable steel plate Aluminum Panel is 0.2~ 1.5mm, the weight of the whole machine is 50kg, and the compact shape is only 300 * 300 * 190mm, which meets the NCCA standard T-Bend test method.
Support 0.1-1 steel plate and 0.1-2 Aluminum Panel test, can complete 0T to 1T multi-stage bending, equipped with pliers pressing device and tape adhesion inspection function, to meet the standard bending test process.
The equipment can perform a 45 ° bending test, support 0.5~ 1.0mm plate thickness, equipped with Travel ≥ 10mm flattening mechanism, suitable for accurate testing of coating flexibility.
The gear pair and crank lifting mechanism are used to achieve accurate bending, the first bending angle is less than 45 °, the flattening mechanism Travel ≥ 10mm, which can test 0.5-2 mm thickness plates and support OT to T bend test.
The test bending angle is less than 45 degrees, suitable for steel plate thickness 0.5~ 1.0mm and Aluminum Panel thickness 0.5~ 2.0mm. The gear pair and crank lifting mechanism are used to achieve T-shaped bending, which is easy to operate.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
Hollow cylinder center aperture 65mm, maximum tension 600KN, manual pump high voltage 63Mpa, digital pressure Gauge direct reading tension value, compact structure and easy to carry.
The central aperture of the hollow self-resetting hydraulic cylinder is 34mm, the maximum pulling force is 150kN, and the digital pressure Gauge can directly read the tensile force value. The structure is compact and the manual pump can be used as a general high voltage oil power source.
The central aperture of the hollow self-resetting hydraulic cylinder is 18mm, the maximum pulling force is 10kN, and it is equipped with a digital pressure Gauge to read the tensile force value directly. The structure is compact and easy to carry. The manual pump can be used as a general high voltage oil source.
Measurement range 0~ 12.7mm, resolution up to 0.001mm, contact pressure 20 +/- 0.5Kpa to ensure measurement Stability, suitable for all kinds of sheet material thickness detection.
The center hole of the hollow hydraulic cylinder is 45mm Travel 80mm, the digital pressure Gauge adopts imported sensor accuracy 1% F.S., with peak holding and Data storage functions, and the automatic reset structure is simple and durable.
It can be used with Force Gauge for vertical and horizontal testing, suitable for accurate measurement of thrust or tension, stable structure and easy operation.
Measurement range up to 1000KN, hollow self-reset design, cylinder Travel 150mm, digital pressure Gauge can directly read the force value, with peak holding, storage, clearing, query and automatic shutdown functions.
This fixture is specially used to fix the Force Gauge display to ensure that the instrument is stable and does not shake during the test. It is suitable for a variety of Force Gauges to improve Test accuracy and ease of operation.
Provide an additional one-year warranty period, which is applicable to Coating thickness Gauge pRoducts. It needs to be purchased simultaneously when purchasing the equipment and is not sold separately.
