Electric lifting design to achieve dispersed ground synchronization, maximum Rotation speed 3000rpm, fineness of grinding up to 10um or less, configuration double-decked chill down jacket temperature rise less than 10º, zirconia bead medium to ensure efficient grinding.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
The pneumatic clamping method is adopted, with a maximum load of 0.5KN. The clamping is stable and reliable, and the operation is simple. It is suitable for a variety of material testing scenarios.
Pneumatic fixture to achieve automatic clamping, no manual operation; Measurement range covers 10~ 16000mN, support a variety of sheet material Tear strength detection, equipped with 3.2 inch LCD display and thermal printer.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
Rotation speed 3000rpm with zirconia bead grinding medium, fineness up to 10um or less; double-decked chilled down jacket design makes the operating temperature rise less than 10º; electric lifting structure is easy to operate and clean, suitable for medium and low viscosity material processing.
The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
Rotation speed up to 3000rpm, fineness of ground up to 10 microns, equipped with double-decked chill down jacket to make the temperature rise less than 10 degrees, electric lifting design easy to operate and easy to clean.
Using pneumatic clamping sample, test range 250~ 5600kPa, accuracy +/- 0.5% FS, equipped with silicone oil medium to avoid rusting, automatic shutdown and storage of 50 sets of data, support emergency stop protection and real-time pressure monitoring.
Driven by compressed gas, torque can reach 80N.cm, with self-locking chuck to ensure concentricity, equipped with pressure Gauge monitoring, Cube lifting clip can adjust height, a variety of Impeller adapt to different viscosity media.
Made of aluminum alloy, with a size of 50 * 50mm and a clamping diaMeter of 16mm, it has a lifting adjustment function and a stable and durable structure.
Driven by compressed gas, torque can reach 80N.cm, with strong load starting ability; equipped with self-locking chuck to ensure concentricity, Cube lifting fixed clip can adjust the height arbitrarily, smooth and safe operation.
Potential energy method is used to ensure Repeatability, pneumatic clamping and automatic cutting reduce human error, equipped with multiple sets of pendulum capacity, Measurement range covers 0~ 64N, test units can be automatically converted.
High Accuracy Sensor ensures +/- 0.5% error, pneumatic clamping system is easy to operate, supports 1600kPa Measurement range, can display pressure Linear dispersion and automatic statistics, protect Sensor safety.
