Rotation speed 3000rpm, maximum linear speed 33m/s, high dispersion efficiency, strong material shear force, the formation of uniform suspension effect, safe and convenient operation, electric lifting fast fixed sealing barrel.
Electric lifting design is light and convenient, the highest Rotation speed 3000rpm, linear speed of 33m/s, double-end sealing structure to ensure vacuum sealing defoaming, suitable for viscosity ≤ 25000cps materials.
Low-speed running torque output of 94N.cm, using multi-stage Non-metallic gear transmission force, stable running state and low noise, stepless speed range of 100~ 1400rpm, suitable for a variety of Impeller and containers.
The blade width is 100mm and the height is 60mm, and the Rod length is 300mm, generating tangential flow and high shear rate to prevent medium deposition, making it suitable for low-speed stirring.
When stirring, a tangential flow is generated, and a high shear rate is formed at the edge to prevent medium deposition. The blade width is 100mm and the height is 60mm, and the Rod diaMeter is 8mm, which is suitable for low-speed and mild stirring.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Vacuum sealing defoaming effect, Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting operation is convenient, high dispersion efficiency, suitable for viscosity ≤ 25000cps materials.
Rotation speed up to 3000rpm, maximum line speed 33m/s, electric lifting design easy to operate, double-end sealing structure to ensure the vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.
Rotation speed up to 3000rpm, linear speed up to 33m/s, electric lifting design, double-end sealing structure, suitable for viscosity ≤ 25000cps materials, uniform dispersion and good defoaming effect.
Rotation speed up to 3000rpm, line speed up to 33m/s, electric lifting design for easy operation, double-end sealing structure to ensure vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps material.
Rotation speed up to 3000rpm, line speed up to 33m/s, electric lifting operation is convenient, double-end sealing structure to ensure vacuum sealing defoaming effect, suitable for viscosity ≤ 25000cps materials.
Electric lifting design is lightweight and convenient, the highest Rotation speed is 3000rpm, the linear speed can reach 33m/s, the double-end sealing structure ensures the vacuum sealing defoaming effect, and is suitable for materials with viscosity ≤ 25000cps.
Three cutting methods are available, with a maximum cutting diaMeter of 30mm. It is equipped with a 7-inch Touchscreen and a fully enclosed safety protection structure. The work surface is made of stainless steel, and fast clamps and vertical clamps are provided to meet different sample clamping needs.
Using stepless speed regulation technology, Speed range 0~ 2800rpm, turnover diaMeter 4mm, support point and continuous Operating Mode, high performance motor to ensure rapid mixing and low noise.
Adopting stepless speed regulation technology, the maximum speed is 2800RPM, the eccentric spherical shaft design is easy to install, the TPU countertop is wear-resistant and corrosion-resistant, compact in size and low in noise, suitable for high-speed mixing operations.
