Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Using formed process, film thickness 29.7 μ m, diaMeter 9.52mm, total length 400mm, application width 300mm, stainless steel material, no wire-wound design.
Hold space at both ends, film thickness 15 microns, application width 300mm, 304 stainless steel material formed pRoduction process to ensure Spreader uniformity and durability.
With four film Film thickness, Spreader width 160mm, wear-resistant corrosion-resistant alloy steel material, can precisely control wet-film or dry-film thickness, ensure coating conformity and Repeatability.
Formed pRoduction process to ensure coating uniformity, wet film thickness 18 microns, diaMeter 10mm total length 250mm precision size design, 304 stainless steel material to ensure durability and corrosion performance.
Adopting manual sprocket drive structure, Working Travel ≥ 80mm, equipped with four weight combinations, accurate drawing is achieved through replaceable 808 stylus, and different diaMeter graphics are supported.
Equipped with a specific weight handle to achieve uniform pressure coating, no need for manual pressing; using a formed pRoduction process, the wet film thickness is controlled at 15 μm, and 304 stainless steel material ensures durability.
The paint film adhesion was measured by the circular trace method, the drawing diaMeter was 0~ 10.5mm, and the Working Travel was 80mm. The integrity of the paint film was evaluated according to seven grades, and the operation was simple and reliable.
Formed pRoduction process to ensure coating uniformity, 15μm wet film thickness accuracy control, equipped with a special handle to solve the problem of manual uneven pressure, 304 stainless steel material to ensure durability and corrosion resistance.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Using metal plating anilox roller, the number of lines can reach 180 lines/inch, which can precisely control the film fineness, and is suitable for the uniform Spreader test of inks Coating glue on various substrates.
Spreader wet film thickness of 200 microns, groove design is not easy to block and easy to clean, to ensure the uniformity and accuracy of Spreader, support laboratory manual or Automatic Film Applicator.
Both ends retain handheld space, film thickness 15 microns, application width 300mm, 304 stainless steel material, formed pRoduction process to ensure uniform coating.
Wet film thickness 20μm, application width 210mm, groove is not blocked and easy to clean, support customization of various models to meet different Spreader needs.
Formed design Coating Weight is about twice the wide-wound drawdown bar, wet film thickness 13μm, film accuracy of 0.5 micron, 304 stainless steel material to ensure durability.
