Driven by DC motor, the clamping disc rises and falls rapidly, supports 0-2 hours oscillation time adjustment; with automatic pressure adjustment function to avoid container damage, with 680-710 times/minute Frequency to achieve up and down before and after multi-shake mixing, the main motor Power 750W.
The equipment supports 0.5-20 liters of barrel paint mixing, revolution speed 100-200rpm, rotation speed 200-400rpm, using multi-stage intelligent frequency conversion speed regulation and door opening and shutdown protection to achieve smooth operation and safe operation.
DC24V permanent magnet brushless motor direct drive, speed range 200-3000rpm, circumferential diaMeter 4.5mm, with automatic fixture identification and over-temperature protection, noise below 45dB, support jog and continuous operation mode.
Support 720 ° positive and negative two-way swirl/spin, completely solving the problem of insufficient one-way mixing; the fully automatic intelligent clamping system applies force accurately according to the size of the barrel; the revolution speed is 100-200rpm, and the rotation speed is 200-400rpm, ensuring uniform and efficient mixing.
32 5ml centrifuge tubes can be installed vertically on both sides, using a vertical installation design, suitable for HT-X100 swirl/spin Mixer, improving Sample Handling efficiency.
Double-sided horizontal mounting design can accommodate 40 centrifuge tubes simultaneously, compatible with 1.5ml and 2.0ml specifications, suitable for swirl/spin Mixer for efficient Sample Handling.
Adopting rotary oscillation design, Frequency 3000rpm, pendulum amplitude 5mm, suitable for small containers such as testtube and Colorimetric tube, it can efficiently handle the experimental requirements of large chemical reactions and few solutions.
Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Using stepless speed regulation technology, Speed range 0~ 2800rpm, turnover diaMeter 4mm, support point and continuous Operating Mode, high performance motor to ensure rapid mixing and low noise.
DC brushless drive, Speed range 5~ 200rpm, time setting 1-9999min, automatic tone, a variety of tray adaptation, maintenance-free design to ensure stable and reliable operation.
Rotation speed 2500rpm, can handle 2000ml volume sample, integrated magnetic stirring, vortex mixing and microplate oscillation multi-function.
Metal module to avoid sample contamination, temperature control accuracy of +/- 0.5 ℃, speed range of 200-1800rpm, support multi-point operation and power failure automatic recovery function.
With mixing oscillation incubate three-in-one function, temperature accuracy up to +/- 0.5 ℃, Speed range 200-1800rpm, metal module to avoid pollution, support 5 point program operation and power failure automatic recovery.
With magnetic stirring function, the maximum stirring capacity of 2000ml, Speed range 200-2500rpm, vibration range 4.5mm, support point and continuous operation mode switching.
With point and continuous operation mode, Speed range 200-2500rpm, reinforced engineering plastics and TPU work surface, acid and alkali wear resistance, support magnetic stirring and microplate adaptation.
