Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Adopting 7-inch Capacitive Touchscreen Control, Supports 2000W Maximum Power and Automatic Frequency Tracking, Supporting Sound Insulation Box Reduces Noise by More than 70%, Industrial Grade Titanium Amplifier Rod Can Work Continuously for More than 1 Hour.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Impedance input controller, equipped with two-stage signal amplifier, Measurement accuracy of +/- 0.01pH, support for external brands of ElectRode, suitable for harsh industrial environments.
Wire-wound process, wet film thickness 9.1 microns, application width 300mm, total length 400mm, stainless steel material to ensure durability and accurate Spreader effect, suitable for a variety of industrial applications.
The wet film thickness is 22.9 microns, the application width is 300mm, the stainless steel material is used, the forming Rod is processed by extrusion process, the continuous wire is easy to clean, and the wire-wound drawdown bar is widely used based on traditional principles.
With dual range and dual accuracy design, Capacity 30kg + 40kg, minimum weighing 0.1g + 0.5g, support dual mode of weight counting, six-stage shock-proof filtering and various unit conversions to meet the needs of complex industrial environments.
Adopt industrial PID self-tuning control technology, temperature control accuracy +/- 2 ℃, the highest temperature up to 1000 ℃, with over-temperature protection and automatic thermostatic Timing function, Furnace volume 7L, heating uniform and stable.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
With dual range and double accuracy design, weighing range up to 20kg + 30kg, accuracy 0.1g + 0.2g, support six-level shock filtering and a variety of weighing modes, adapt to complex industrial environment.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
The formed process ensures that the film is uniform, the film thickness is 118.9μm, the Rod diaMeter is 9.5mm, the total length is 40cm, and the effective application width is 30cm.
Using silicon molybdenum Rod heating element and double-decked air-cooled structure, the maximum temperature is 1700 ° C, the heating rate is 10 ° C/min, with 30-stage program temperature control and +/- 1 ° C thermostatic accuracy, and the Furnace shell surface is kept at low temperature to ensure safe operation.
