Compression stroke 2.50mm, load 237g, suitable for wet mold sand/core surface Hardness measurement, support USB and Bluetooth data output, with average calculation and undervoltage alarm function.
Suitable for manual or mechanical low and medium pressure molding of fine sand core testing, compression stroke 2.50mm, load 980g, with average calculation and MAX Maximum latch function, support data output communication.
Suitable for high voltage molding sand test, compression stroke 2.50mm, load 1500g, with average calculation and MAX Maximum latch function, support USB and Bluetooth data communication.
Measurement accuracy up to +/- 6HL with digital dual coil probe technology, support for a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function, can be adapted to four different Impact devices to meet diverse measurement needs.
Digital probe technology implementation signal direct processing, strong anti-interference ability, Measurement accuracy +/- 12HL, built-in direction Sensor automatic compensation Impact direction error, support 8 kinds of Hardness standard automatic conversion, weight only 270 grams easy to carry.
Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Digital display design, compact and easy to operate, Measuring accuracy, low power consumption, easy to carry, suitable for field and laboratory rapid Hardness detection.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
Split design with four Impact devices, digital dual coil probe technology to ensure +/- 6HL Measurement accuracy, automatic direction compensation to achieve 360 ° measurement, support a variety of Hardness standard automatic conversion, to meet different detection needs.
Split design can be matched with a variety of Impact devices, using digital dual coil probe technology, Measurement accuracy of +/- 6HL, support 360 ° automatic direction compensation, built-in a variety of Hardness standard automatic conversion, with statistical and QC two Measurement modes.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
Suitable for low hardness rubber and sponge determination, measurement range 20-90HAO, resolution 0.1HAO, support real-time mode, peak mode, automatic timing and average mode.
Using split design, the probe and the host are connected by aviation plug, equipped with digital dual coil probe technology, Measurement accuracy can reach +/- 6HL, support a variety of Hardness standard automatic conversion, with 360 ° direction automatic compensation function.
Che design without support, one-handed operation can complete the test. Measurement range 0~ 100HBa, equivalent to brinell hardness 25~ 150HB, with MAX Maximum hold function, can output a variety of Hardness conversion value.
Che type design, test range 0~ 100HBa, equivalent to 25~ 150HBW, no support, one-handed operation, with MAX Maximum hold and average calculation function, can measure a variety of Hardness values.
