Wine Color Measurement Instrument

The wine colorimeter measures the absorption rate of specific wavelengths of light by the wine using a photoelectric sensor and converts it into a color value. It is used to detect the color consistency of alcoholic beverages and control the appearance standards of products in wineries and quality inspection institutions.
Selection
When selecting, consider that the measurement wavelength range should cover the common color spectrum of alcoholic beverages, check the instrument calibration certificate to ensure data reliability, ensure the operation interface is simple and easy to read, the body structure should be suitable for laboratory environments, and refer to the actual usage feedback from similar users.

Terms

Instruments

With automatic temperature compensation function, Measurement range covers 0~ 35% Brix and 0~ 22% convertible wine accuracy, accuracy of +/- 0.2, large TFT color screen display, IP65 waterproof and dustproof.

$ 304.00

With automatic temperature compensation function, large TFT backlight color screen display, IP65 Protection Rating, measurement of whiteness 0~ 35% and convertible wine accuracy 0~ 22%.

$ 304.00

With 0~ 60% w/w wine accuracy Measurement range, accuracy +/- 0.3, support automatic temperature compensation and IP65 Protection Rating, anti-light interference design.

$ 304.00

Measurement range of 0~ 35% Brix sugar content and 0~ 22% wine accuracy conversion ability, IP65 Protection Rating design, support automatic temperature compensation and user-defined zero mode, excellent anti-light interference performance.

$ 304.00

With 0~ 60% v/v wine accuracy Measurement range, accuracy +/- 0.3, support automatic temperature compensation and user-defined zero point, anti-light interference design, adapt to different environment needs.

$ 304.00

Built-in Wine pH ElectRode with CPS technology, Measurement range 0.00~ 12.00pH, accuracy +/- 0.05pH@25 ° C. Compact design weighs only 46g, CR2032 battery provides 1000 hours of battery life, suitable for rapid on-site inspection.

$ 299.00

Optical inspection system to ensure long-term Stability, Stray Light and Color Interference to a low level, Measurement range 0-1200NTU, accuracy +/- 2% + 0.05NTU, support Manual calibration and GLP management functions.

$ 2074.00

Adopt Φ 4mm measurement aperture and full Light spectrum LED Illuminant, chromatic value Repeatability Delta E * ab 0.05, support cloud color database and a variety of Color difference formula calculation, portable design with dust cover and long battery life.

$ 538.00

With 45 °/0 ° illumination and D65 Measurement light source, viewing angle of 10 °, support for multiple Color model conversion, weight of only 45g for portability, quality control and complementary color suggestions.

$ 380.00

Adopt 8 °/d illumination mode and Φ 4mm measurement diaMeter, chromatic value Repeatability Delta E * ab within 0.1, with Automatic calibration and moving Color Chart database function, support a variety of Color difference formula and Illuminant simulation.

$ 344.00

Adopt Φ 4mm measurement aperture and full Light spectrum LED Illuminant, chromatic value Repeatability Delta E * ab within 0.1, support cloud database and popular color search, portable design battery life up to thousands of measurements.

$ 441.00

Equipped with eight Illuminants and three measurement diaMeters, the repeability accuracy reaches 0.05, supports a variety of Color difference formulas and display modes, built-in whiteboard automatic correction, suitable for irregular surface and small area measurement.

$ 1687.00

Equipped with 50mm large measurement diameter, it can effectively deal with the Color measurement of uneven samples such as powder. Illuminant life of the instrument is up to 2 million times, the test port adopts full sealing design to prevent dust intrusion, and the Data storage capacity is up to 10,000 pieces.

$ 1187.00

Using refraction principle design, 3 seconds fast display results, automatic temperature compensation function, the number of uses up to 10000 times, wine accuracy Measurement range 0~ 60% v/v, accuracy +/- 0.3.

$ 251.00

Equipped with eight Illuminant and eight Color difference formula, repeability accuracy of 0.05, support three display modes and 8mm general measurement aperture, built-in whiteboard automatic correction, suitable for a variety of materials Color measurement.

$ 1493.00

Articles

Spectrophotometer measures ink spectral reflectance and opacity.
This article introduces how to measure the hiding power of ink using a spectrophotometer. The instrument irradiates the ink sample, measures its reflectance within the visible light spectrum, and calculates the hiding power using the Kubelka-Munk model.
The combination of hiding power chart paper and a spectrophotometer enables the digital evaluation of hiding power.
This article introduces how to combine hiding power cards with spectrophotometers to achieve digital assessment of hiding power.
Colorimeter evaluation of color difference in anodized coloring layers
This article explains how colorimeters are used to evaluate color differences in anodized coloring layers. It describes how colorimeters convert colors into numerical values based on international standards and quantify color variations by calculating the color difference ΔE.
A spectrophotometer uses digital language to describe colors, making color differences impossible to hide.
A spectrophotometer measures the color of an object through spectral analysis, converting reflected light data into spectral curves. It then calculates chromaticity parameters such as L*a*b* based on international standards, achieving a digital representation of color.
How to Interpret Color Difference Lab Values Measured by a Spectrophotometer? Save This Color Difference Judgment Standard Now!
This article explains how spectrophotometers measure and evaluate color differences using the Lab color space. In the Lab values, L represents lightness, while a and b indicate the red-green and yellow-blue color biases. The color difference ΔE is calculated using a formula to quantify the variation between a sample and the standard.