Adopt pressure transducer induction, digital indication, capacity 0~ 100kg/cm ², clamp ring diaMeter is 31.50mm, automatically retain the maximum Breaking strength value and support data printing.
Adopt pressure converter to achieve +/- 0.5% FS High Accuracy measurement, clamp ring diaMeter is 31.5mm, support 170 +/- 10cc/min oil feeding speed, with automatic reset and data processing capabilities, stable and convenient operation.
Adopt pressure converter induction, capacity 50kg/cm ², oil feeding speed 175 +/- 5mL/min (Cardboard), automatically complete the pressurization and decompression operation, and automatically retain and print out the test results.
Automatic shutdown and decompression to the initial position, one-button operation test, can store 50 sets of data and automatically calculate the average and MAX Maximum, Measurement range 204-8160kPa, Indication Error +/- 0.5% FS.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
Using pneumatic clamping sample, test range 250~ 5600kPa, accuracy +/- 0.5% FS, equipped with silicone oil medium to avoid rusting, automatic shutdown and storage of 50 sets of data, support emergency stop protection and real-time pressure monitoring.
Measurement range 10~ 1600kPa, Precision ≤ +/- 0.3%, equipped with 7-inch Touchscreen real-time display test Linear dispersion and a variety of data, support automatic clamping and calibrating system.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Using signal transmission pressure, automatically retain the maximum Breaking strength value, Measurement range Cardboard 250~ 5600KPa, paper 50~ 1600KPa, indication accuracy ≤ +/- 1% F. S, oil feeding speed adjustable.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
The use of national standard 06Cr19Ni10 stainless steel precision machining, high temperature resistance up to 300 ℃, low temperature resistance to -100 ℃, hardness ≤ 187HB, with acid and alkali resistance, grinding anti-sinking, anti-stick, suitable for dry grinding and wet grinding.
With two test stations, the load range is 50~ 1000g, and three typical wear resistance tests of alcohol, eraser and pencil can be carried out, which is suitable for wear resistance evaluation of various coatings and materials.
Can reduce the contact resistance of 35~ 95% and temperature rise of 35~ 85%, high temperature resistance up to 200 ℃, with anti-oxidation, anti-corrosion performance, suitable for a variety of metal connections, improve safety and stability.
