Simultaneous sampling ECT (100 * 25) mm and PAT (80 * 25) mm two sizes, sampling error +/- 0.5mm, thickness range ≤ 10mm, easy to operate.
Using 0-3000rpm stepless speed regulation, Processing capacity of 10-200L, with full explosion-proof safety design, hand lifting structure is easy to operate, suitable for high viscosity material dispersion mixing process.
Equipped with 7-inch high definition full color touch display, support custom range accuracy and full Auto Internal Cal, Capacity 20kg, reading accuracy 0.1g, provide a variety of weighing modes and function expansion.
Adopt double comma Blade Coating head and three independent temperature zone drying system, film accuracy up to +/- 0.005mm, drying temperature up to 250 ℃, equipped with full servo tension control and automatic deviation correction system, realize fully automated precision Spreader process from unwinding to rewinding
Temperature range 5~ 50 ℃, temperature accuracy +/- 0.5 ℃, with forced air circulation system to make the temperature distribution uniform, support Oscillation Frequency start to 280rpm and timing function, built-in lighting for easy observation of the experimental process.
Adopt full digital control AC motor, speed accuracy +/- 0.5%, effective force range 1~ 100% FS, strong structural rigidity, support a variety of test modes such as tensile, compressive, tensile, etc., easy to operate, stable and reliable.
Adopt Full Digital Control Frequency AC Motor, Speed accuracy +/- 0.5%, Effective Travel 850mm, High Accuracy Double Roller Screw and Guide Column, Support Tensile, Compression, Tension and other test modes.
Measurement accuracy of +/- 0.5%, support 174-900HL range, with full angle automatic identification function, no need to manually set the direction, optional variety of Sensors to adapt to different Film thickness and material inspection needs.
With full light 10~ 50 ℃ and no light 5~ 50 ℃ Temperature range, Temperature Uniformity +/- 2 ℃, Illumrination degree ≥ 2500lx, suitable for a variety of experimental needs, stable and reliable performance.
Sampling size 25.4mm * 140mm, thickness range 0.05~ 1.2mm, parallelism of two long sides ≤ 0.015mm, to ensure High Accuracy sampling, Improve Test Reliability.
Using three-point positioning method and High Accuracy coaxial concentric process, the parallelism of the two long sides is less than or equal to 0.015mm, the sampling thickness is 0.1-1.2mm, the built-in spring resilience coefficient decays more slowly, and the chrome steel tool has high durability after high temperature quenching.
Using the principle of polarized light interference, equipped with 560nm full-wave plate, determinable or semi-Basis Weight measurement of internal stress, the aperture of the polarizer is 150mm, which supports continuous and rapid analysis of transparent materials.
Using SCI light-containing mode and full LED Illuminant, support 34 kinds of Color Space, Repeatability Delta E * ab ≤ 0.08, compact and portable design, weight only 80g, Automatic calibration and intelligent color difference calculation, easy and efficient operation.
The sampling area is 100mm ² and the error is controlled within +/- 0.35cm ², which can handle 0.1~ 1.2mm Film thickness materials. The circular sampling design is used to ensure the standard of the sample, and the operation is simple and the results are reliable.
Wet film thickness 13.7 μ m, formed process without wire-wound, wear-resistant stainless steel material, total length 40cm, application width 30cm, easy to clean.
