Spreader thickness range 0.01~ 10mm, coating speed 5~ 180mm/s, using removable drawdown blade and import bar to ensure Spreader uniformity and High Accuracy control, improve experimental repRoducibility.
Using imported wire Rod accuracy of 1 μ m, Spreader rate 5~ 200mm/s adjustable, support scraper and wire Rod two Spreader mode, Heating Temperature Uniformity +/- 3 ℃, suitable for a variety of substrate Film thickness treatment.
Using Blade Coating method, Spreader accuracy of +/- 10μm, Spreader thickness range of 0~ 5000μm, support stepless speed control and Touchscreen operation, effectively improve film conformity and experimental efficiency.
Wet film thickness 12 microns, application width 60 mm, the use of formed pRoduction process and 304 stainless steel material, suitable for small area experimental needs, to avoid unnecessary cost waste.
Spreader rate 5~ 180mm/s adjustable, heating temperature up to 200 ℃, equipped with vacuum adsorption system to ensure Spreader flat, reciprocating lame plating to achieve uniform film, improve experimental repRoducibility.
Using bar and adjustable Blade Coating method, Blade Coating accuracy of +/- 0.003mm, coating speed 5~ 200mm/s adjustable, effective coating area 400 * 300mm, to ensure film repRoducibility and conformity.
Spreader accuracy of +/- 0.003mm, thickness range of 0~ 10mm, speed 5~ 180mm/s adjustable, heating temperature to 180 ℃, using continuously variable speed and removable drawdown blade design, improve the convenience of operation and film conformity.
Manufactured using the wire-wound process, with a wet film thickness of 36.6μm and a coating width of 300mm, the stainless steel material ensures durability and precise coating results, meeting various experimental needs.
Complete the sterilization of small metal Glass appliances within ten seconds, the maximum temperature is 300 ° C, the temperature control accuracy is +/- 5 ° C, and the built-in over-temperature protection device ensures the safe operation.
Wet film thickness 29.7 microMeters, coating width 300 milliMeters, using stainless steel wire-winding process, suitable for experimental sample preparation.
Measured value 500N, suitable for rubber, cable, paper, electrical components, Plastic film and other materials tensile force, destructive force, insertion force test, supporting Force Gauge test bench.
The formed design ensures uniform film, the wet film thickness is precisely controlled to 2μm, the application width is 60mm to meet the small area requirements, and the 304 stainless steel material ensures durability and cleaning convenience.
Coating speed 1~ 10m/min adjustable, wet film thickness range of 0.005-3mm, drying temperature up to 200 ℃, using continuous experimental film design, equipped with adjustable Blade Coating device and automatic deviation correction function.
The 4-sided design can be prepared with four film thicknesses, application width 80mm, stainless steel material, suitable for water-based, acidic and alkaline pRoducts, high film accuracy and small size.
Using 304 wear-resistant stainless steel material, wet film thickness 18.3μm, Spreader width 300mm, suitable for a variety of fluid samples of experimental film requirements.
