The use of low-speed intermittent barrel edge mixing, L-shaped paddle mixing design can be completed in five minutes uniform mixing, Speed range 0~ 60rpm, mixing process inks do not heat up, clean simple.
The four-blade structure makes the mixed medium flow radially up and down, forming strong turbulence and high shear force. The diaMeter of the 150mm paddle is suitable for medium and high viscosity liquids, which can effectively crush the particles in the liquid.
Mixing method of low speed intermittent sticking barrel edge, L-type paddle mixing design makes inks flip and cut, mixing evenly within five minutes without heating up, Speed range 0~ 60rpm, transmission mode is direct transmission to reduce power loss.
Mixing method, L-shaped integral forming Impeller without screw hole easy to clean, Speed range 0~ 60rpm, direct drive to reduce power loss, can set the mixing time and equipped with moving pulley.
The four-blade structure makes the mixed medium flow up and down radially, forming strong turbulence and high shear force. The diaMeter of the slurry is 50mm, which is suitable for stirring medium and high viscosity liquids and effectively crushing particles in liquids.
Using 140 * 250mm black and white half design, no Laminating surface to ensure detection accuracy, suitable for hiding power performance testing, Encasement specification of 100 sheets/pack for experimental use.
Using 32-bit ARM processor to improve processing speed, Measurement range 250~ 5600kPa, automatic clamping system with air source operation, support pressure Linear dispersion real-time display and thermal print output.
The black and white half design is easy to observe the covering effect, the size is 194 * 260mm to meet the standard test requirements, and the non-Laminating surface ensures the detection accuracy, which is suitable for laboratory film performance evaluation.
The 10x30mm standard size design ensures a perfect match with the SH1117 Tester, providing accurate gel strength measurement results.
The stainless steel material ensures durability, and the paddle width of 70mm and Rod length of 350mm are designed for medium and high speed mixing, generating axial flow and local shear force, suitable for a variety of mixing needs.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
The stainless steel material ensures durability, the paddle width is 70mm, and the Rod length is 300mm. The design optimizes the mixing efficiency, and the medium and high speed operation pRoduces axial flow and local shear force, which is suitable for mixing various viscous liquids.
The blade width is 140mm and the Rod length is 800mm, which pRoduces tangential flow to form a high shear rate, which is suitable for polymer reaction and mineral dispersion, and effectively prevents medium deposition.
Six-axis planetary stirring structure, equipped with high-speed disperser and low-speed twist paddle, Rotation speed 0-90rpm, dispersion Rotation speed 0-3800rpm, can achieve no dead angle mixing of materials, and has an online temperature measurement system, temperature error less than 1 ℃.
