Sampling thickness range 0.1~ 1.2mm, folding stiffness 70x38mm, crease stiffness 36x38mm, parallelism on both sides ≤ 0.015mm, suitable for stiffness testing.
It can cut 70 × 38 and 38 × 36 samples, and the sampling thickness range is less than or equal to 1mm. It is suitable for special sampling equipment for stiffness and crease detection, and is used with a variety of stiffness Meters.
It can measure the anti-bending stiffness of the material with a thickness of 0-3mm, the test angle is adjustable from 1-90 °, supports 6 kinds of bending lengths and 3-30 seconds time settings, adopts digital motor control and displays the stiffness time in real time Linear dispersion.
Using 70 * 38mm standard sampling size, the thickness range covers 0.1-1 mm, the parallelism of the two long sides is controlled within 0.015mm, and the crease stiffness sampling size is 38 * 36mm, which improves the accuracy of the stiffness test data.
The punching sampling method ensures accuracy, the sampling size error is controlled within 0.1mm, and two specifications of 70 * 38mm stiffness and 36 * 38mm crease stiffness are supported.
The bearing with accurate guidance and reasonable fulcrum structure, good sampling Repeatability, can handle materials with a thickness of 0.1-1 mm, support 70 * 38mm fold stiffness and 38 * 36mm crease stiffness two sizes, long side parallelism ≤ 0.015mm.
Angle 1-90 degrees adjustable, test time 3-35 seconds can be set, Measurement range 15-10000mN.m, equipped with 5.7 inch LCD real-time display stiffness time Linear dispersion, support automatic zero adjustment and Data analysis.
It can measure three different angles at the same time, the angle range is adjustable from 1-92 °, the Measurement range is 0-10000mN, and it supports a variety of material tests with bending length and thickness 0.01-5 mm. It has automatic reset and self-Adjustment.
The stamping sampling method is accurate and convenient, the quenching tool is resistant to abrasion, the sampling error is +/- 0.2mm, the sampling thickness range is 0.1-1 mm, and the special treatment blade can be used normally for 10 years.
Angle 1-90 ° adjustable, test time 3-35s can be set, Measurement range 15-10000mN.m, real-time display of stiffness time Linear dispersion, automatic zero adjustment and thermal printing function.
With +/- 0.1% accuracy Sensor and 0.01mN resolution, it supports 1-92 ° bending angle adjustment and 0.5-50 °/sec angular speed control, with self-Adjustment and three independently adjustable test angles, suitable for 0.01-5 thickness materials.
Measurement range 20~ 10000mN, with 6 kinds of bending length selection and 1~ 90 ° angle setting function, automatic control to improve measurement efficiency.
Measurement range 1-30N, accuracy +/- 1%, using High Accuracy Force Sensor and precision screw drive system, Repeatability of test results, equipped with calibrated probe pad for easy Measurement calibrated, can be connected to computer display Linear dispersion.
Measurement range 0~ 20N, resolution 0.01N, with movable bench lifting function and thermal print output, support anti-pressure-deformation Linear dispersion real-time display.
Adopt High Accuracy Sensor, Measurement range 0-20000mN, resolution 0.01mN; Test angle 1-92 degrees adjustable, with automatic zero adjustment and high-speed return function, support multi-angle simultaneous measurement, improve test efficiency.
