Using nitrile rubber material, length 100mm diaMeter 20mm, with excellent oil resistance and aging performance, suitable for inks proofing operation.
Maximum load 0.5KN, specially designed for rubber materials to ensure stable and reliable tensile testing, suitable for a variety of Rubber mechanical properties testing.
Suitable for medium hard resilience, rubber or microporous materials, Measurement range 0-100HE, more suitable for thinner or curved samples, can be used with handheld or supporting bench.
Suitable for soft rubber, thermal plasticity resilience and other materials, Measurement range 0-100HO, resolution 1HO, can be used in hand or with the test bench, in line with ASTM D2240 standard.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, error +/- 1HA, can be used in the matching measuring rack or handheld, to meet a variety of rubber hardness testing needs.
Using rigid polyester plate with foam rubber cushion, size 240x340mm, can absorb operating pressure, improve proofing Repeatability and uniformity, suitable for a variety of substrate testing.
Suitable for low Hardness Rubber and Sponge Determination, Measurement range 20-90HAO, Indication Error ≤ +/- 1HAO, Portable design for quick field testing.
Equipped with rigid polyester board and foam rubber cushion, size 11x18cm, can absorb proofing pressure, improve Repeatability and proofing effect, suitable for a variety of substrate detection.
Travel 0-1.25 mm, measurement error +/- 1HAM, pressure at the end of the needle 324-764mN, suitable for thin rubber samples with a thickness of 1.5mm or more, and can be used with a fixed load measuring rack.
Suitable for medium Hardness rubber, thermal plasticity resilience and other materials, Measurement range 0-100HB, can be hand-held or matched with a fixed load test bench to ensure stable measurement.
Travel range of the crimp is 0~ 2.5mm, measurement error is +/- 1HAO, and the end pressure of the crimp is 0.55~ 8.05N, which is suitable for accurate Hardness detection of low Hardness rubber materials.
Travel 0-1.25 mm, measurement error +/- 1HAM, suitable for thin rubber samples with a thickness of 1.5mm or more. Sensitivity is high, and it needs to be used with a constant load measuring rack to ensure Precision.
Adopt double-pointer design, pressure needle Travel 0~ 2.5mm, measurement error +/- 1HAO, can be handheld or used with the bench, suitable for stable and fast detection of low Hardness rubber materials.
Travel range 0~ 2.5mm, resolution 1HD, suitable for high-Hardness rubber and engineering plastics and other materials on-site determination, in line with multinational standards.
