Cube Applicator can achieve 70/150μm double-sided Film thickness Spreader, through the hardening process to ensure that the overall uniform hardening, Spreader width 12mm, guide plate design for narrow Glass panel direct use.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Adopting 500 * 700mm Dimensions, used with bar or Film Applicator, is conducive to the smooth and effective film, and improves the convenience of film operation.
Using ASAB Stavax ESR stainless steel tool steel after zero degree vacuum hardening, hardness HRC55, double-sided design provides 50/100μm two Film thickness, Spreader width 12mm, accuracy +/- 2μm, guide plate removable for narrow panel operation.
Through hardening process to ensure uniform overall hardening, longer service life accuracy and more stable, providing 38/76μm double-sided Film thickness selection, Spreader width 12mm accuracy of +/- 2μm, equipped with removable guide plate for narrow Glass panel operation.
Using stepless motor control film, coating speed 0~ 10cm/s adjustable, equipped with stainless steel waste collection plate, application length can be adjusted freely, saving coating cost.
Using ASAB Stavax ESR stainless steel tool steel vacuum hardened, hardness HRC 55, double-sided design provides two film thicknesses of 50/100 μm, accuracy of +/- 2 μm, equipped with guide plate to ensure direct stretching on narrow Glass panel.
Hardness stainless steel material, Hardness of 50~ 55HRC, film accuracy +/- 2μm, smooth surface to support a variety of Spreader requirements, can be used with Film Applicator to achieve automatic film operation.
Using a formed pRoduction process, the film Film thickness is as thin as 4.6μm, the accuracy is up to 0.1 micron, and the effective Spreader width is 30cm. It can be used with an automatic Film Applicator and has the advantage of continuous wire.
Spreader width 100mm, wet film thickness 40μm, wear resistant corrosion resistant alloy steel material, can be manually operated or with automatic Film Applicator to ensure coating conformity and Repeatability.
Double-sided design can be coated with two pre-order film thicknesses 90 and 150 μm, Spreader width 20mm, suitable for Automatic Film Applicator and Drying Time Recorder, in accordance with ASTM D 823 standard.
Formed to achieve 52.6 micron precision film, 304 stainless steel material provides high Abrasion Resistance, 50mm at both ends of the hand part without additional handle, can be directly matched with the experimental Film Applicator.
Wire-wound process to achieve 40μm wet film thickness, one operation can simultaneously Spreader two or more Coatings, matching Drawdown Plate to improve Spreader repRoducibility, suitable for soft to strong all kinds of substrates.
Wire-wound technology is prepative 40μm wet film thickness, application width of 25.5mm, matching Drawdown Plate for better repRoducibility, stainless steel material to ensure durability.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
