A wet film with a film thickness of 50~ 675 μ m was prepared by using a coating scraper, and the sag property was observed when placed vertically. The maximum thickness without sag was expressed, which was suitable for Paints testing.
Using magnetic Induction and eddy Current dual principle, it can simultaneously measure paints and zinc layer thickness. Measurement range is 0-1500 μm, accuracy is +/- 1%, suitable for composite coating system inspection.
Using magnetic Induction and eddy Current principle, Measurement range 0~ 500μm, resolution 10μm, wear-resistant hard metal probe and Automatic calibration memory function, support USB data communication and automatic shutdown.
Mechatronics design integrated measurement display circuit, manual operation with 20mm/50mm kit, range of 10KN accuracy ≤ +/- 1% F. S, with linear correction and automatic clearing function for a variety of coating platings strength test.
Film thickness range 650~ 875 μ m, Graduation 25 μ m, stainless steel material, Dimension 120 * 22 * 20mm, suitable for the determination of relative sag of Paints.
Made of stainless steel, the range is 10~ 100μm, Division 10μm, Dimension 65 * 36 * 1.5mm, suitable for Paints, varnish and other Coating Coating thickness measurement.
Measurement beam of light diaMeter 1.5mm, measurement window 4mmx2mm, suitable for facet and small curvature surface measurement, low energy consumption single battery can last for more than 58 hours.
Repeatability of +/- 1.5% F.S. with result lock function and automatic overload protection.
Simplified operation without weight, supports KU and gram number dual unit measurement, accuracy up to +/- 1.5% F.S., built-in overload protection automatic shutdown, Interface is equipped for easy output of results.
Scratch coating film thickness range of 50~ 275μm, groove difference of 25μm, stainless steel material, compact size of 120 * 22 * 20mm, suitable for the determination of Paints and other pRoducts.
Adopting convex grinding and concave grinding relative rotation structure, the grinding gap can be adjusted by 0.01-1 mm, and the processing of 100 micron materials can reach 25 microns or less after 5 grinding times. Rotation speed 180rpm ensures grinding uniformity.
Adopt 4mm small diaMeter design, suitable for surface or small area measurement; Repeatability Delta E * ab < 0.05 to ensure Measurement accuracy; Horizontal structure is small in size, comfortable and stable to hold.
Using coaxial cylinder structure, the sample volume is only 7-13ml, the Measurement accuracy is +/- 2%, equipped with timing function and RS232 interface, suitable for small sample testing.
With 60 degree Measurement Angles and Φ 5mm small hole measurement area, support USB and Bluetooth data output, can store 254 sets of data, Automatic calibration without manual adjustment.
Using split design, equipped with F and N Probe, Measurement range 0~ 1250μm, error +/- 3%, support automatic identification of matrix material and RS-232C interface communication, stable and reliable operation.
