Using 1400rpm speed regulation and 1.5 liters effective volume sand grinding basket, rapid dispersion and grinding are achieved through tensile shear and Impact between sand and material, and the operation is simple.
Set dispersion and sand grinding functions in one, complete two processes in a single container, speed range 130~ 3000rpm, grinding basket size Φ 80x60mm, high efficiency and easy to clean.
The variable frequency motor is used to achieve stepless speed regulation from 0 to 7500 rpm, equipped with dispersed impeller and sand grinding blades, and the dual-axis constant force lifting system has a stroke of 200mm, which can adapt to different experimental requirements and calculate the material reaction relationship.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, and the fineness of grinding can reach 25 microns or less, suitable for sample testing, with a capacity of 1.5 liters.
Suitable for medium and high viscosity materials, using bottom open turbine structure with strong suction pump effect, grinding medium diaMeter 0.8-2 mm, frequency conversion speed range 0-1440rpm, equipped with chill down heating jacket to control material temperature.
Centrifugal separation device to achieve large Flow rate discharge, equipped with double mechanical sealing and double chill down mode, grinding Chamber capacity of 0.3L, Power 1.5kw, effective control of ground heat and ensure stable operation.
Cylinder volume 120L, Rotation speed of dispersion shaft 700rpm, using sieve discharge design, can adjust the grinding medium to adapt to different fineness requirements, to achieve continuous and efficient pRoduction.
With 10L Processing capacity and 0.1μm discharge accuracy, four-station design and 580rpm Rotation speed, support wet and dry grinding and vacuum grinding, configuration 600CFM cooling system and a variety of materials ball mill Tank optional, good grinding conformity.
Maximum feed size 2mm, minimum discharge particle size 0.1um, support dry grinding wet grinding vacuum grinding and other methods, equipped with a variety of materials ball mill Tank, can control Rotation speed and time to ensure grinding Repeatability.
360 degree tumbling structure combined with planetary disk swirl/spin, maximum Processing capacity 80L, minimum discharge particle size 0.1μm, support dry grinding, wet grinding, vacuum and other grinding methods, equipped with a variety of materials ball mill Tank to adapt to different samples.
Using dual-axis constant force lifting system and variable frequency motor, 0-3000rpm stepless speed regulation, equipped with dispersed impeller and sand grinding blades, can directly calculate the relationship between material viscosity and reaction rate.
Continuously variable frequency speed regulation 0-3000rpm, ground medium 0.8-2 mm, stable operation and low noise, can work continuously for a long time, suitable for medium and low viscosity fluids.
Adopt frequency conversion motor to achieve stepless speed regulation of 60-8000rpm, equipped with dual-axis constant force lifting system and sand grinding blade disc, with digital display Rotation speed and timing function, lifting Travel up to 250mm.
Rotation speed of the ball mill can reach 1100r/min, the minimum discharge particle size is 0.1μm. It supports dry and wet milling and various material Tanks, and the grinding is uniform and efficient.
1400 rpm high-speed stirring is used to achieve strong tensile shear and Impact between the material and the sand, the fineness of grinding can reach 25 microns or less, and the capacity is 1.5 liters, which is suitable for laboratory sample dispersion grinding.
