The frequency conversion motor is used to achieve stepless speed regulation of 60~ 8000rpm, and the digital PID control accuracy is high. It is equipped with dispersed impellers and sand grinding blades to adapt to different experimental needs, and the relationship between material viscosity and reaction rate can be directly calculated.
Digital P.I.D. temperature control, temperature control accuracy +/- 1 ℃, heat sealing temperature up to 300 ℃; dual cylinder structure to ensure pressure equilibrating, heat cover temperature uniformity, support automatic and manual operation mode, improve test efficiency.
Measurement range from 0.00 μS/cm to 100.0 mS/cm, Automatic Frequency Switching and Manual temperature compensation ensure Reading Stability and High Accuracy for a wide range of liquid media detection.
Adopt digital P.I.D. temperature control, temperature control accuracy +/- 1 ℃, heat sealing pressure 0~ 0.7Mpa adjustable, double cylinder structure to ensure pressure equilibrating, heat sealing knife aluminum alloy material uniform heat conduction, support automatic and manual mode.
Adopt high temperature dry heat technology, Temperature range RT + 10~ 250 ℃, Input Power 1550W, with High Accuracy Microcomputer LCD display, automatic over-temperature protection and forced convection design, shorten disinfection time.
The heat sealing paraMeters were determined by hot-pressing sealing method, the temperature control accuracy was +/- 1 ℃, the heat sealing time was adjustable 0.1-999 s, the upper and lower heat heads were independently controlled, and the double-decked heat insulation design ensured the safety of use.
The heat sealing performance was determined by hot pressing sealing method, the temperature control accuracy was +/- 0.2 ℃, the heat sealing time was 0.1~ 999.9s, the upper and lower heat heads were independently controlled, and the double-decked heat insulation design ensured safety.
High frequency principle, measurement range 0-90%, Response Time 1 second, Sensor and host split design, small size and light weight, easy to quickly detect on site, strong anti-interference performance.
Using high frequency principle to achieve nondestructive detection, Measurement range 0~ 99.9%, Response Time 1 second, support 50mm scanning depth, can be selected according to different materials gear to improve accuracy.
Using high frequency principle, measurement range 0-90%, resolution 0.1/0, Response Time 1 second, Sensor and host split design, Portable structure is suitable for on-site rapid detection.
Using 5MHZ Frequency and 14mm diaMeter design, support 450 ℃ high temperature environment measurement, Measurement range 3.0~ 200mm (steel), minimum pipe diaMeter 30mm, suitable for high temperature material thickness detection.
Using frequency conversion brushless motor, Rotation speed up to 8000RPM, Electric lift Travel 300mm, brushless abrasion, can handle high viscosity materials, provide stable shear rate.
Fast measurement using high frequency principle, Response Time is less than 1 second, measurement range 0-90%, Sensor and host split design is easy to carry on site, strong anti-interference performance and good stability.
Temperature range RT +~ 300 ℃, temperature control accuracy +/- 0.2 ℃, heat sealing time 0.1~ 999.9s adjustable, heat head with brass material to ensure uniform heat conduction, double-decked thermal insulation protection to ensure safe operation.
Using high frequency principle, Measurement range 0-99.9%, Response Time 1 second, probe Sensor can be deeply measured inside the material, split design is easy to carry on site.
