Film Film thickness 22.9μm, Spreader width 30cm, wear-resistant stainless steel material, molding process, suitable for low viscosity glue and thermal glue experimental Spreader.
Using 470nm wavelength and double-sided LED Illuminant irradiation, equipped with amber filter and 105 * 163mm glue cutting area, accurate fluorescence sample separation operation can be achieved.
Using double-sided LED Illuminant and 400nm wavelength, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which is convenient for accurate separation of fluorescently labeled nucleic acid protein samples.
Using 365nm wavelength double-sided LED Illuminant, equipped with amber filter, the glue cutting area is up to 105 * 163mm, which can clearly observe the fluorescence and accurately separate the target area.
Spreader thickness range of 10-250μm, Dry-Film accuracy of +/- 3 microns, equipped with automatic constant tension control and four Oven section thermostatic, ensure uniform and stable Spreader, Oven with waste heat recovery system energy saving about 30%.
The equipment adopts High Accuracy modular Spreader station, all-electric control without air source, minimum glue thickness 0.01mm, Spreader speed 2-4.5 m/min adjustable, with electronic control precision tension to adapt to a variety of materials such as paper, plastic and metal film.
Using slot-die coating method, application width ≤ 500mm, thickness range 10-250μm; equipped with automatic deviation correction and constant tension system, Oven temperature RT +~ 160 ℃, support segmented thermostatic, ensure Spreader accuracy +/- 3 microns.
The formed pRoduction process ensures that the film is uniform, the film thickness is 22.9μm, the application width is 300mm, which is suitable for low viscosity glue experiment, and the material is wear-resistant stainless steel to prolong the service life.
Maximum Spreader width up to 1000mm, Spreader speed 1-10m/min adjustable, support unlimited length Spreader and automatic winding, forward and reverse stepless speed change, discharge and receiving reel tension adjustable, heating Rod and glue slot can be quickly disassembled to clean up residual glue.
Spreader Film thickness accuracy of +/- 0.003mm, Spreader rate of 5~ 180mm/s adjustable, supports a variety of Spreader processes and substrates, can work in the glove box, to meet the laboratory R & D request.
Spreader accuracy of +/- 0.003mm, support 5~ 180mm/s stepless speed, Heating Temperature range RT +~ 200 ℃, suitable for a variety of substrate Spreader experiments.
Adopting dip coating with double roll extrusion structure, Spreader thickness 0.3-10 mm adjustable, mechanical speed 1.2m/min can be slowly adjusted, built-in glue circulation system to ensure Spreader uniformity.
Accuracy up to +/- 2 microns to ensure experimental accuracy, Spreader width 160mm total length 190mm lengthened design, high Hardness stainless steel material Hardness value 50~ 55HRC, corrosion resistance and wear resistance and smooth surface.
K-shaped cogging design, large tooth spacing, suitable for high viscosity Coating, wet film thickness 100 μ m, leveling, wider cogging bottom, suitable for glue and other viscous materials Spreader.
Spreader speed 5-180mm/s adjustable, wire Rod Spreader accuracy +/- 0.001mm, using touch screen control and mechanical fixture to ensure stable and reliable Spreader process.
