Adopting spiral trapezoidal screw, it has the characteristics of manual operation, simple stability, vertical and lying dual-use, the maximum load is 500N, and the tensile force is Travel 200mm. It is suitable for tensile and compressive load, insertion and unplugging force, and failure test.
The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
Set dispersion and stirring functions in one, lifting Travel 250mm, speed range 100~ 8000rpm, dual-axis constant force lifting to ensure stable operation, processing viscosity up to 100000mPa.s.
Adopt trapezoidal screw drive and integral nut design, rated load 500N, Travel 150mm, can be firmly clamped to prevent partial load, fast loading and unloading to improve measurement accuracy, vertical and horizontal dual-use to adapt to a variety of test scenarios.
Using formed process, wet film thickness 35 microns, application width 400mm, continuous wire, uniform film and good repRoducibility, easy to clean after the experiment.
Adopt trapezoidal screw drive, rated load 500N, Travel 150mm, with manual operation, simple and stable, vertical lying dual-use and other characteristics, suitable for tensile and compressive load and failure test.
Electric lifting platform Travel 500mm, speed range 0-2880rpm, maximum processing viscosity 30000cp, hexagonal screws connected to the dispersion disc for easy disassembly and assembly, long-term stable operation.
Rotation speed 0-3000rpm, fineness of grinding can reach 10um or less, double-decked chill down jacket is used to control temperature rise less than 10 ℃, electric lifting operation is convenient, zirconia bead grinding medium to achieve efficient dispersion and ground synchronization.
It adopts trapezoidal screw drive and side handwheel loading mode, which is stable and easy to operate. It is equipped with a mobile base platform, which can realize free movement of front, rear, left and right. The rated load is 500N, and the Test Travel is up to 250mm, which meets a variety of mechanical testing requirements.
With a wide range of 0-2800rpm speed regulation and 250mm automatic lifting Travel, the dual-axis constant force system is used to achieve smooth lifting, and the integrated sand disc and dispersion disc meet a variety of process requirements.
Adopt 1500W three-phase asynchronous motor, Rotation speed 0-2800rpm adjustable, equipped with a variety of stator head to adapt to different viscosity materials, electric lifting 500mm Travel easy to operate, turn stator gap small shear fineness.
Equipped with a digital ruler to collect displacement data, the resolution is up to 0.01mm, the maximum measurement load is 500N, the base has a mobile platform for easy installation of fixtures, and the side handwheel is easy to load and operate.
The equipment can complete two processes of dispersion and grinding at the same time, Rotation speed 0-1500rpm, grinding capacity 30-100L, using zirconia grinding medium and chill down jacket design, temperature rise is small, easy to operate.
Using handwheel swirl/spin screw to control displacement, smooth operation and simple operation, rated load 500N, Test Travel 0~ 200mm, vertical horizontal dual-use design for easy installation and use.
The equipment adopts electric lifting and frequency conversion speed regulation, Rotation speed 0-3000 rpm, equipped with double-decked chilled down jacket and zirconia bead grinding medium to achieve efficient wet dispersion grinding, small temperature rise and easy operation.
