Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Wet film thickness 137.2 μm, coating width 300 mm. The wire-wound structure enables the preparation of uniform coatings on both flat and easily raised substrates, while the two-end hand grip design facilitates even force distribution during operation.
Glass material is conducive to film flatness, size 230 * 340mm, with wire Rod or Film Applicator for scraping operation is more effective.
The equipment adopts scraping method, coating speed 1~ 10m/min, thickness range 0.005-3mm, equipped with automatic deviation correction and tension control to ensure uniform and stable Spreader.
Using 180 * 480mm size, with wire Rod or Film Applicator scraping ink, is conducive to the film flat and effective, improve film mass.
Using 160 * 280mm size, with wire Rod scraping ink to ensure that the film is flat, Glass table is conducive to operation and observation effect.
Using a formed pRoduction process, the wet film thickness is 76 μm, the accuracy is 0.5 μm, and the 304 stainless steel material is used to ensure durability.
The wire-wound process is employed, achieving a wet film thickness of 52.6μm, with a coating width of up to 300mm. A 50mm grip area is provided at both ends for ease of operation, and the stainless steel material ensures durability.
Wet film thickness 2μm, application width 250mm, formed pRoduction process, 304 stainless steel material to ensure durability, no handle design is easy to use matching handle.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, equipped with drying tunnel temperature RT + -200 ℃ and automatic deviation correction device to ensure uniform and stable Spreader.
Adopt scraping method, coating speed 1-10m/min adjustable, Spreader thickness range 0.005-3mm, drying tunnel temperature up to 200 ℃, equipped with adjustable drawdown blade device and thickness adjustment dial Meter to achieve precise control.
Formed pRoduction process to ensure uniform film, wet film thickness 82.3 μ m precise control, stainless steel wear-resistant and durable, application width 300mm to meet a variety of experimental needs.
Using the formed pRoduction process, the wet film thickness is 6 microns, the accuracy is 0.5 microns, the cleaning is convenient and there is no worry of broken wire, to ensure the precision and durability of the coating prepative.
Support bar and Drawdown blade double coating method, suitable for high, medium and low viscosity materials; coating speed 1~ 300mm/s stepless adjustable, Blade Coating accuracy +/- 3μm; equipped with innovative clamshell magnetic Drawdown blade and simple bar installation, easy to clean and load; Heating and Vacuum chuck function to improve Spreader mass.
