Overview
The OSP-2/250 coating rod is a professional film tool with a wet film thickness of 2μm, a total length of 250mm, and an application width of 250mm. The product is made of 304 stainless steel, which is formed to ensure accuracy and is suitable for small width Spreaders. It can effectively save costs and reduce material waste.
Features
1.The wet film thickness is precisely controlled at 2μm
2. Provide 250mm application width to meet small width requirements
3. Made of 304 stainless steel, with strong durability
4. Spreader uniform formed production process
5. No handle design, can be used with another purchased handle
6. Save costs and reduce material waste
Principle
The coating rod is manufactured by a formed production process. When used, the Coating Uniform Spreader is placed on the surface of the substrate, and the precise structure of the rod surface controls the wet film thickness to 2 μm. Coating thickness and uniformity can be precisely controlled when the rod is rolled or scraped on the substrate.
Applications
Spreaders, small area films, sample prepatives, scientific research experiments
Steps
1. Prepare Substrates and Coatings that Need Spreaders
2. If you need to hold it more comfortably, you can install the matching handle first.
3. Coating evenly on the substrate
4. Scrape with coating rod at proper angle and pressure
5. Keep moving at a constant speed to ensure uniform film
6. Clean the coating rod in time after completing the Spreader
Notice
• Ensure that the surface of the coating rod is clean and free of contamination before use
• Spreaders maintain uniform pressure and speed
• It should be cleaned and maintained in time after use
• Pay attention to operation safety when designing and using without grip
• Avoid use on rough or sharp surfaces to prevent damage
• Avoid collision and extrusion when storing
