Constant pressure ensures uniform sampling, suitable for a variety of powder material testing, implementation of GB9087-88 and other standards, improve sampling accuracy and conformity.
Using the rotary oscillation mode, Oscillation Frequency up to 3000 rpm, swing amplitude of 5mm, through smooth contact to achieve rapid mixing, speed can be adjusted with pressure, suitable for a variety of laboratory applications.
Can simultaneously detect dynamic and static Coefficient of Friction, force range 0~ 5N, accuracy level 1, support microcomputer control and micro printer output test report.
The static capacity method is used to test the principle, the aperture analytical range is 3.5 to 5000 angstroms, and it is equipped with a modular stainless steel vacuum gas circuit and a metal dewar bottle, which supports DFT and MC theoretical model calculations.
SUS304 stainless steel inner box and double insulation structure, equipped with 360 degree swirl/spin sample holder and precise ozone concentration control, temperature fluctuation +/- 0.5 ℃, support static dynamic tensile test, suitable for rubber durability research.
Manual pressure control pressure holding operation is simple, electronic pressure holding device reduces mechanical abrasion, pressure range 0~ -90kPa, accuracy +/- 0.1kPa, Organic Glass sealing barrel wall thickness 15mm to enhance compressive strength.
It can automatically measure the dynamic and static Coefficient of Friction at the same time, using high-precision ball screw drive, the total error of the force measurement system is less than +/- 2%, and the micro printer can print multiple sets of results and the average value.
Based on the national standard design, the static Coefficient of Friction and the dynamic Coefficient of Friction can be measured simultaneously, with a test accuracy of up to 0.001N, equipped with High Accuracy Sensor and special drive system to ensure smooth operation and accurate results.
The static capacity method is used for testing, with a specific surface area ranging from 0.01 m2/g to no upper limit, and a pore size analysis of 3.5 to 5000 angstroms. The modular stainless steel gas circuit design ensures a high vacuum, and the metal dewar bottle maintains a constant temperature. It supports a variety of theoretical model calculations.
Anti-static housing and automatic lifting design, built-in PT100 temperature Probe, measurement accuracy of +/- 1% F.S., support Gigabit network port data transmission and various viscosity unit interchange.
With three standard test modes of strength, fixed value and stacking, the test space is 1400 * 1400 * 1400mm, and the accuracy is within +/- 0.5%. It can be stacked for 12 hours or 24 hours, meeting the requirements of national standards.
Using electric pressure system and circular pressing operation mode, printing pressure 0-4mm, speed 0-100 Meters, adjustable scraper pressure and speed, support low accuracy overprinting and Color detection.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
With three standard test modes of strength, fixed value and stacking, the test space is 600 * 800 * 800mm, the accuracy is controlled within +/- 0.5%, supports KG, N, LB Unit switching, and is suitable for pressure performance testing of various Encasement parts.
