Mixing method of low speed intermittent sticking barrel edge, professional Impeller design, can be thoroughly stirred in 10 minutes without heating up, Speed range 0~ 50rpm adjustable, easy to replace stainless steel Mixing Tank.
The use of low-speed intermittent barrel edge stirring, mixing inks evenly within five minutes without heating up, Speed range 0~ 60rpm, L-type paddle stirring design is clean and simple, direct transmission to reduce power loss.
Spreader thickness range 0.01~ 10mm, coating speed 5~ 180mm/s, using removable drawdown blade and import bar to ensure Spreader uniformity and High Accuracy control, improve experimental repRoducibility.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
Manufactured using the wire-wound process, with a wet film thickness of 36.6μm and a coating width of 300mm, the stainless steel material ensures durability and precise coating results, meeting various experimental needs.
Driven by brushless DC motor, Speed range 60~ 1500rpm, Acceleration 1~ 250rpm/s. Supports forward and reverse alternating and intermittent stirring, programmed control ensures mixing uniformity and Repeatability.
Driven by brushless DC motor, Speed range 60-1500rpm, Acceleration 1-250rpm/s. Supports forward and reverse cycle and intermittent mode, program paraMeters can be stored for a long time, Operating interface is intuitive.
Wet film thickness 29.7 microMeters, coating width 300 milliMeters, using stainless steel wire-winding process, suitable for experimental sample preparation.
With 3000 times/min and 6000 times/min two vibration frequencies, the amplitude can be continuously adjusted between 0mm and 3mm, supporting three modes of subtle vibration, intermittent vibration and continuous vibration, suitable for ≤ 325 mesh material analysis.
Spreader thickness range 0.001-10mm adjustable, bar accuracy +/- 0.001mm, support 5-200mm/s stepless speed, through mechanical fixing and stable pressure to ensure film uniformity, improve experimental repRoducibility.
Wet film thickness adjustment range 0.005-3mm, Spreader accuracy +/- 5%, using servo drive and PLC control to achieve 1-10m/min adjustable coating speed, with automatic tension control and hot air circulation oven.
The Tester has a 0.1 to 4.0mm multi-specification groove depth, which can be used with a sag Tester for dedicated testing to help quickly adjust the Coating formula and improve the experimental efficiency.
Wet film thickness is 45.7 μm, coating width is 300 mm, made of stainless steel for wear and corrosion resistance, with an accuracy of 0.1 μm, suitable for high-viscosity or high-wear experimental environments.
Temperature control accuracy of 0.5 ℃, pump Flow rate ≥ 4L/min, ensure uniform and stable water temperature, compact and durable structure, suitable for a variety of experimental environments.
Utilizing an extrusion pRoduction process, it features a wet film thickness of 182.9 microMeters, a coating width of 300 mm, and is made of durable stainless steel material, making it suitable for high-viscosity and high-wear experimental environments.
