The four-sided design allows for the preparation of film thicknesses of 200μm, 400μm, 600μm, and 800μm. Made of stainless steel, it offers high coating precision, a compact size, and is suitable for various substrates and coatings with different pH levels.
In line with the LOVIBOND color scale standard, the sub-field of view Color matching Sensitivity is high, the Measurement range is red 0.1-79, yellow 0.1-79 LOVIBOND units, and the structure is simple and easy to operate.
Imported matte aluminum reflector to achieve uniform lighting, equipped with six kinds of Illuminants including D65 and UV, table size 700 * 530mm to meet a variety of color requirements.
The 4-sided paint design can be prepared with four different thickness wet-film, application width 75mm, accuracy +/- 3μm, corrosion-resistant stainless steel material, easy to clean and durable.
The drying process of paint film and putty film can be accurately measured by using circular track needle design, equipped with four different radius needle (R0.25/0.5/1.0/1 mm), and the track period is 24h/r.
With four Illuminant automatic switching function, display the use time of each Illuminant, no need to warm up without flashing, Color temperature range covers 2700K to 6500K, low energy consumption without heating, support Metamerism detection.
Adopt CMOS Dual Spectroscopic Sensor, Repeatability Delta E * ab within 0.02, equipped with Φ 8mm and Φ 4mm four measurement diaMeters, support non-contact automatic whiteboard calibration and a variety of Color Space, to meet the needs of accurate color measurement in various industries.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the accuracy is +/- 3μm, the application width is 80mm, the stainless steel material is resistant to corrosion, and the operation is simple only need to change the angle.
The 4-sided design can convert the angle to obtain four wet film thicknesses, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali corrosion, and the conductive smear is removable for easy cleaning and maintenance.
4-sided film equipment accuracy of +/- 2 microns, Spreader width of 250mm, high hardness stainless steel material, hardness 50~ 55HRC, corrosion resistance and wear resistance, support non-standard customization and automatic film matching.
Using 45 °/0 ° illumination, Repeatability Standard Deviation ≤ E * ab ≤ 0.08, can store 1500 sets of data, support a variety of Color difference formulas and four Available Light Sources to meet different measurement needs.
The 4-sided design can be prepared with four wet film thicknesses, and the conversion angle is easy to operate; the stainless steel material is resistant to acid and alkali corrosion, and the conductive film can be disassembled; the application width is 60mm, and the accuracy is +/- 3μm to ensure the accuracy of the test.
The integrated design can convert four film thicknesses, the accuracy is +/- 3μm, the stainless steel material is resistant to corrosion, and the conductive film can be removed for easy cleaning and maintenance.
The 4-sided design can convert the angle to obtain four wet film thicknesses, the application width is 60mm, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali corrosion, and the guide film can be removed for easy operation and maintenance.
Contains 215 Colors, Fan-shaped design is easy to carry, color sample size 2.0x5.0cm, each page displays 5 Colors, bright type, widely used in Coating industry color comparison.
