Adopting direct temperature control technology, the heat exchange speed is only 1-3 seconds, the speed range is 100-3000rpm, and it has 5 speed adjustment and 12 groups of parameter memory functions to improve the stability of the coating.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
The vacuum pressure plate is made of pure bronze, the drying temperature can be adjusted from room temperature to 120 ℃, equipped with double drying stations and intelligent drainage system, and the paper uniformity can reach 96.
Equipped with a 200mm diaMeter pick-up cylinder and an 8-liter capacity, the manual Stirrer works in tandem with an 80-mesh forming filter for uniform Pulp distribution and efficient dehydrating.
Using platinum sheet material, Conductivity Detector cell constant 0.1, no temperature compensation function, suitable for pure water and ultra-pure water and other water quality measurement, optional Glass flow Tank.
Using platinum sheet material, Conductivity Detector cell constant is 1, Measurement range covers 2.0~ 200 µS/cm, suitable for conventional water detection, interface is three-core socket, no temperature compensation function.
The linear guide is used to ensure smooth and fast sampling, and the imported tungsten sheet is cut without burrs and durable. It supports 18mm thickness sampling, and can cut 25 × 100mm and 25 × 80mm samples.
Adopting the national standard, the papermaking diaMeter is 200mm, and it is equipped with manual pulp board and vacuum papermaking functions, which can prepare laboratory paper samples that meet various international standards.
Three-stage centrifugal Vacuumpump to achieve -0.092~ -0.098MPa high negative pressure, drying Film thickness up to 10mm, with electric homogenization and vacuum pressing function, no maintenance and adapt to harsh environment.
Adopting chip tray direct temperature control technology, the heat exchange speed is 1-3 seconds, the speed range is 100-3000 rpm, the acceleration is 100-3000 rpm, and it has 5-stage speed adjustment and 12 sets of parameter memory functions to meet the diverse process requirements.
Adopt A/B dual test mode, Measurement range 50-2000g accuracy 0.1g, equipped with pneumatic sample clamping system and automatic data recognition function, support a variety of unit display output.
Measurement range 10-16000mN, accuracy +/- 1%, support RS232 communication and 7-inch color touch screen operation interface.
Adopt pressure converter induction, capacity 50kg/cm ², oil feeding speed 175 +/- 5mL/min (Cardboard), automatically complete the pressurization and decompression operation, and automatically retain and print out the test results.
Maximum shear force 1400N, upper and lower blade center spacing 2.2mm +/- 0.05mm, using high anti-interference 16-bit A/D analog-to-digital conversion circuit, with Data storage, peak holding and range setting functions, easy and fast operation.
Adopt mirror stainless steel argon arc welding box and hot air circulation system, Temperature Uniformity +/- 3%, equipped with over-temperature protection and timing function, support multi-stage programming and data recording optional.
