Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
With tracking pointer and peak pointer double pointer design, pressing needle Travel 0-2.5 mm, Measurement range 10-90Hc, suitable for material testing with pressure above 0.049MPa when the compression rate is 50%, and can be matched with test bracket to improve Stability.
Suitable for low and medium Hardness material measurement, pressure needle end pressure 0.55N-8.06N, pressure needle stroke 0-2.5 mm, can be matched with test rack to reduce manual operation error, improve test accuracy and Repeatability.
Pin Travel 0~ 2.5mm, Measurement range 0~ 100HA, Error +/- 1HA, Dual pointer design can display real-time and peak Hardness value at the same time, easy to use handheld or rack.
Can be used with A type or C type Shore DuroMeter, fixed load weight mass 0.75 +/- 0.05kg, hardness Gauge clamping Rod connection size M7x0.5mm, improve hardness testing accuracy and Stability.
Adopt double-pointer design, pressure needle Travel 0~ 2.5mm, measurement error +/- 1HAO, can be handheld or used with the bench, suitable for stable and fast detection of low Hardness rubber materials.
Che type hardness Gauge, test range 0~ 100HBa, equivalent to brinell hardness 25~ 150HB, no support, one-handed operation, with MAX Maximum retention function, suitable for various aluminum alloys and frp materials.
The device adopts D-type Impact device, supports 360 ° measurement, can display a variety of Hardness standards, has 600 sets of Data storage capacity, is small in size and weighs only 0.2kg, and has a standby time of 100 hours. It is suitable for small spaces and field environments.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
Suitable for materials such as high Hardness rubber and engineering plastics, pressing needle Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, in line with ASTM D 2240-05 and GB/T2411-2008 standards.
The C-type Impact device has a small impact force and is suitable for surface hardening and thin-walled component testing; dual coil technology ensures +/- 6HL typical accuracy; built-in directional Sensor automatically compensates for errors; supports 5 Hardness standard conversions.
Suitable for medium Hardness rubber, thermal plasticity resilience and other materials, Measurement range 0-100HB, can be hand-held or matched with a fixed load test bench to ensure stable measurement.
Suitable for soft rubber, thermal plasticity resilience and extremely soft plastics, Hardness Measurement range < 20 HDO, with real-time, peak, timing and average Measurement mode, can be connected to the computer for data management and analysis.
New material pressure needle Hardness long life, high strength pointer is not easy to deform, forging handle wear and pollution resistance, range 0-20HW accuracy 0.5HW, can be quickly tested on site and support multi Hardness value conversion.
With three Adjustments, it can simultaneously measure Richter, Brinell, Rockwell and other Hardness values, indication Repeatability 6HLD, support 360 ° measurement direction, standard D-type Impact device and optional Miscellaneous type, anti-vibration Impact electromagnetic interference.
