Adapted diaMeter 16mm formed Metering Rod, the total length of 2000mm, through the special structure to correct the straightness of the Rod body, to ensure stable rotation and full contact with the substrate, improve the thickness control accuracy of Spreader.
Using 100LPI line number and quadrilateral pyramid hole structure, the transfer uniformity of inks is precisely regulated through hole shape and line number, which affects the wet film thickness and ensures the stability of ink supply.
Wet film thickness 22.9 microns, diaMeter 9.52 mm, the forming Rod uses an extrusion process to process continuous grooves, with no wire breakage and easy cleaning; the wire-wound Rod is based on the traditional principle, and there are differences in coating amount.
Using stopwatch counting method, the length of the swing Rod is 500 +/- 1mm, and the total mass of the swing is 120 +/- 1g. The resistance to deformation is evaluated by measuring the ratio of the swing amplitude time on the film to the swing time on the Glass.
Measurement range 0~ 1500μm, accuracy +/- (5μm + 5%), stylus end angle of 60 degrees, suitable for surface profile measurement, with line design for easy connection.
Wet film thickness 45μm, main Rod diaMeter 10mm, effective application width 600mm, using SUS304 material, Coating Weight, length and surface preparation can be customized, suitable for a variety of Spreader conditions.
Using the formed pRoduction process, Coating Weight is about twice that of the wire-wound coating Rod, wet film thickness is 13μm, film accuracy reaches 0.5 μm, and the material is 304 stainless steel.
Equipped with 1 tie Rod and 10 adapters, the specifications cover M6 to M24, and are suitable for a variety of bolt sizes to ensure test compatibility and ease of operation.
Adopting quadrilateral pyramid mesh structure, line number 300LPI, print width 70mm, chrome plating on the surface to enhance Abrasion Resistance and block solvent corrosion, electronic engraving technology to ensure accuracy.
Waterproof design can be used in humid environments, dual-line display displays the current value and extreme value at the same time, low-power error-proof system avoids wrong readings, temperature range -50.0~ 150.0 ℃, accuracy +/- 0.4 ℃.
Equipped with a low-power error-proof system to avoid erroneous readings, the dual-line display screen simultaneously displays the current temperature and recorded value, the temperature measurement range covers -200 ° C to 1371 ° C, supports ℃/° F Unit switching, waterproof design adapts to a variety of environments.
Built-in 15ml test solution can be used more than 100 times, pen design to reduce liquid and air contact, in line with ASTM D2578 and TAPPI T698 standards, 6 months valid period to ensure test accuracy.
Measurement range 0~ 12mm, accuracy of 0.01mm, using digital High Accuracy hundred (thousand) sub-Meter head, easy to operate and safe and reliable measurement, in line with GB/T 16311-2009 standard requirements.
Built-in 15ml test solution, can be used more than 100 times, pen design to reduce the contact between dyne liquid and air, in line with ASTM D2578 and TAPPI T698 standards, effectively control the material surface tension.
With bar and Drawdown blade two Spreader mode, using clamshell Drawdown blade head and new bar Installation method, easy to clean. Spreader speed and length can be freely adjusted, film thickness control accuracy is high, suitable for Glass, cardboard and other substrates.
