Test accuracy is ensured by using 500g payload and carbide circular tool, built-in horizontal bubble, and 20 times Microscope can accurately measure the size of the Crowd, with a reading accuracy of 0.1mm.
Measurement accuracy of +/- 1% and speed range of 0~ 300mm/min, support tensile, compression, bending, disbonding and other test modes, effective Travel 600mm to meet different material testing needs.
The equipment is designed according to the international coating stain resistance experimental method, the water Tank volume is 5L, the inner diaMeter of the flow pipe is 8mm, and the time control range is 0~ 99h99s. It is suitable for the stain resistance test of building exterior coatings.
4-Terminal Resistance Measuring method is used to eliminate the influence of wire resistance. Test speed is up to 6 times/sec. Measurement current is less than 100mA to prevent temperature drift and ensure Precision and Stability.
Adopt variable frequency motor control to achieve 50 +/- 5mm/min compression speed, equipped with thermal printer to achieve high-speed silent printing, effective Travel up to 400mm and platen spacing can be arbitrarily set 0-500mm.
Using 2-wire method and 3-wire method measurement, Ground Voltage Measurement range 0~ 200V, Ground Resistance Measurement range 0~ 1999 Ω, Response Time about 5 seconds, with continuous measurement and overload protection function.
It is suitable for a variety of mechanical property tests such as tension, compression, bending, shear, tearing, peeling, and puncture. It supports multiple control modes including constant speed, fixed displacement, and constant force, enabling complex multi-step nested loop control, and features powerful data and curve analysis capabilities.
Measurement range 0-3000N, accuracy up to +/- 1% of the reading, equipped with 7-inch screen display test Linear dispersion, with automatic conversion of edge pressure strength, ring pressure strength and other functions, support data statistics and micro printing.
Double ball screw and guide column structure ensure parallelism, force accuracy +/- 1%, compression displacement error ≤ 1mm, equipped with overload protection and high-speed printer, support 5-300mm/min stepless speed regulation.
Maximum test force 50N, Accuracy grade 0.5, support tensile, compression, bending, shear and other test modes, with powerful Linear dispersion analysis and custom report functions.
Two-cylinder pneumatic clamping specimen, clamping force 2300 +/- 500N, can store 5000 groups of batch data, support vertical and horizontal testing and real-time force value-displacement Linear dispersion display, improve testing efficiency.
Double grinding head assembly configuration, total weight 1500g, Reciprocating Frequency 37 +/- 2 times/min, Travel 300mm, can accurately evaluate the stain resistance of the film.
Suitable for inner paper tube testing with an outer diaMeter of 400mm, with a capacity of 500kg and an adjustable speed of 10-80mm/min, it automatically judges the crushing force and supports data printing function.
With four adjustable friction Frequency 21/43/85/106cpm, friction load 20N, support linear reciprocating friction movement, power-off memory function to ensure that paraMeters are not lost, effective analysis of coating adhesion and wear resistance performance.
The use of national standard 06Cr19Ni10 stainless steel precision machining, high temperature resistance up to 300 ℃, low temperature resistance to -100 ℃, hardness ≤ 187HB, with acid and alkali resistance, grinding anti-sinking, anti-stick, suitable for dry grinding and wet grinding.
