Supports iron-based and non-iron-based material measurement with accuracy of +/- 1~ 3% or +/- 2.5 µm, provides split Probe for enhanced maneuverability, automatically recognizes matrix materials and remembers calibrated values.
With iron-based and non-iron-based dual-use function, resolution up to 0.1um, test range 0~ 1250um, support single and continuous measurement, automatic identification of matrix material, stable and portable operation.
Based on the principle of flow between parallel plates, it can quickly and accurately measure inks spread under low shear stress. The sample volume is 0.5 +/- 0.003 cubic centiMeters, and the maximum measurement range of the plate is 9cm. It is suitable for inks flowability evaluation.
Range 320~ 320000000mPa · s, support 0.1~ 200rpm stepless speed change, LCD screen can simultaneously display viscosity, shear rate, shear stress and other sets of paraMeters, with a small number of sample adapters only 10-20mL sample volume.
Small hydraulic device to achieve masonry shear test, rated thrust 150KN, digital pressure Gauge direct reading, accuracy +/- 1%, detection of local damage, easy to operate.
Using 16-bit microcomputer processor and stepper motor high subdivision drive, the whole process of stepless variable speed and stable Rotation speed, Measurement accuracy of +/- 1% F. S, LCD screen can display viscosity, shear rate, shear stress, Rotation speed, temperature and torque and other paraMeters.
The rotational speed range is 200-11000rpm, the processing capacity is up to 40L, and the precision-matched stator structure is used to achieve high-efficiency shear emulsification, which is suitable for the dispersion of various viscosity liquids and granular materials.
Using 316 stainless steel working head, Speed range 1000-13000rpm, maximum processing viscosity 8000mpa.s, with stepless speed regulation and real-time data display function, suitable for shear emulsification experiments of various viscosity liquids.
Driven by a series-excited high-speed motor, Speed range 0-11000rpm, rotor maximum linear speed of 19m/s, tens of thousands of shear tears per minute, processing viscosity up to 8000cp, to achieve efficient emulsification dispersion.
Driven by high-speed motor, the speed range is 1000-13000rpm, the maximum processing viscosity is 8000mpa.s, with constant speed control and overload protection, suitable for shear emulsification experiments of various viscosity liquids.
Contains 240 kinds of matte colors for interior and exterior walls, mainly ferric oxide exterior Color, providing a complete water-based paints formula, size 150mm * 50mm * 15mm, a total of 60 pages, 4 color blocks per page, easy to configure and control.
The Piezoelectric Ceramic Shear Sensor can simultaneously measure Acceleration, Speed and Displacement, Acceleration Measurement range 0.1~ 199.9 m/s ², with automatic switching range and backlight display function.
Using Piezoelectric Ceramic Shear Sensor, Acceleration Measurement range 0.1~ 199.9m/s ², Frequency range 10Hz~ 1KHz, with automatic switching range and backlight display function.
Using magnetic Induction and eddy Current dual principle, Measurement range 0-1250μm, support split probe flexible replacement, with automatic identification of matrix material function, minimum measurable surface radius 1.5mm.
Adopt dual stator structure to enhance shear effect, Power 1050W, Speed range 3500-25000rpm, equipped with a variety of stators interchangeable, support continuously variable speed and strong torque output.
