The equipment integrates dispersion and stirring functions, lifting Travel 250mm, with a maximum processing viscosity of 100000mPa.s. It adopts a dual-axis constant force lifting structure, resulting in stable operation and uniform mixing.
Set dispersion and stirring functions in one, lifting Travel 250mm, speed range 100~ 8000rpm, dual-axis constant force lifting to ensure stable operation, processing viscosity up to 100000mPa.s.
Lifting height 0-300mm adjustable, Test speed 30 times/minute, with power outage memory function, eccentric wheel design for easy Travel adjustment, suitable for luggage handle durability detection.
Filtrate efficiency ≥ 99.97% For particles ≥ 0.5μm, the average wind speed is adjustable from 1.2 to 2m/s, the trend purification level is up to 1000, the work surface can reach 10,000, equipped with mobile runner and adjustable jack, flexible to adapt to changing working positions.
Using electric lifting platform and three-phase asynchronous motor, the speed range is 0~ 2880rpm, the maximum processing viscosity is 30000cp, the operation is stable and the noise is small, it can operate for a long time, the dispersion disc is resistant to corrosion and easy to disassemble.
The mobile sleeve liquid fluid design, equipped with silver ion trapping trap, Glass film resistance is less than 50MΩ, and the shell is made of lead-free Glass to ensure stable measurement and durability.
Rotation speed of 10000rpm is achieved by using 750W three-phase asynchronous motor, and the electric lifting platform supports 300mm Travel, which can handle 10L materials and work continuously for a long time.
Using an electric lifting platform, lifting Travel 500mm, equipped with a three-phase asynchronous motor can achieve stepless speed regulation from 0 to 2880rpm, with a maximum processing viscosity of 30000cp, stable operation and low noise.
Adopt two-box mobile structure, air pressure drive test object Impact, Thermal Shock mechanism moving time within 10 seconds, temperature recovery time within 5 minutes, in line with MIL and other international test standards.
Using two-box mobile Impact structure, Thermal Shock mechanism moves within 10 seconds, temperature recovery time ≤ 5 minutes, equipped with rigid polyurethane foam insulation material, effective energy saving and waterproof and moisture proof.
Electric lifting platform equipped with 500mm Travel, 0~ 2880rpm stepless speed range, the maximum processing viscosity of 30000cp, using stainless steel dispersion disc and three-phase asynchronous motor, stable operation noise, can run for a long time.
Using a two-box mobile Impact structure, the air pressure drives the test object to move up and down, the Impact conversion time is within 10 seconds, and the temperature recovery time is within 5 minutes, meeting the requirements of international testing standards such as MIL and IEC.
With two-box mobile Impact structure, the temperature recovery time is less than 5 minutes, and the conversion time is only 10 seconds. Equipped with rigid polyurethane foam insulation material, it has ultra-low temperature thermal conductivity and waterproof performance, and supports programmed temperature control.
Dynamic Impact is achieved with a two-box mobile structure, with a hot and cold conversion time of 10 seconds and a temperature recovery time of 5 minutes. It is equipped with rigid polyurethane foam insulation material, with ultra-low temperature thermal conductivity and multiple safety protection devices.
Dynamic Impact is achieved with a two-box mobile structure, with a cold and heat conversion time of no more than 10 seconds and a temperature recovery time of less than 5 minutes. It is equipped with HFC environmentally friendly refrigerant and a binary ultra-low temperature freezing system, meeting the requirements of many international testing standards.
