Film thickness 0.3mm fillet Perforating design, easy to paint adhesion, hardness, Impact and other performance tests, about 70 pieces per kilogram to meet the needs of batch experiments.
Size 70x130mm Film thickness 0.3mm, rounded corners Perforating design is convenient for coating performance testing, suitable for adhesion, hardness, Impact and other film testing scenarios.
Film thickness 0.3mm fillet Perforating design, suitable for coating adhesion, hardness, Impact and other performance testing, to ensure that the film preparatory smooth and stable.
Double-sided uniform tin plating, surface mass I, Hardness T52, standard thickness 0.28mm, provide crimping listening plate, rounded corners with or without holes and other specifications, single batch pRoduction of 10w sheets.
Size 100x150mm, Film thickness 0.3mm, rounded corners Perforating design for easy fixing and operation, suitable for a variety of industrial coatings performance testing, to ensure the accuracy of film testing and repeability.
Using double-sided uniform tin plating process, the surface mass reaches class I, Hardness T52, standard thickness 0.28mm, to ensure accurate and reliable film test results.
Using irreversible discoloration technology, temperature point 60 ℃, specification 2x2cm circular design, with Pressure sensitive adhesive to ensure firm paste, over temperature display red, black and other Color changes.
Using one-piece casting process, strong and not easy to deform, maintaining test parallelism; Measurement range 0~ 4mm, resolution 0.01mm, contact pressure 100 +/- 10kPa, contact area 2 +/- 0.05cm ², in line with standard requirements.
White part reflectance 80 +/- 2, non-Laminating design to enhance paint wettability, test area of 0.1 square Meters, Curl and checking resistance, suitable for brushing applications.
The bending diaMeter of putty film cracking peeling is tested by bending test plate, and the shaft Rod size is 50mm and 100mm. It is suitable for 0.2-0 mm thick tinplate substrate, and the operation is simple and reliable.
The four-guide column structure is adopted to ensure smooth sliding and high accuracy, the knife die life is ≥ 30,000 times and there is no burr Linting defect, the maximum punching size is 100mmx140mm, and the volume is small and safe to operate.
Equipped with R25 and R50 two kinds of support film specifications, support 0.2-0 mm tinplate test plate substrate, through the rolling shaft uniform bending deformation, easy to observe the physical changes of the film.
The design of top outlet air and front inlet air is used to improve the heat transfer effect, and the double pump and double temperature control are equipped to realize the independent cooling down of the main and auxiliary waterways, and support the pump pressure of 0.8 bar and the adjustment of the wide temperature range of 5~ 35 ℃.
Using irreversible discoloration technology, Measuring temperature 80 ℃, 15 * 15mm square design, single piece single temperature measurement, suitable for indoor environment use.
The equipment can detect the crazing or peeling of the putty film after bending, equipped with R25 and R50 support film specifications, shaft Rod size is 50mm and 100mm in diaMeter, suitable for 0.2-0. 3mm thick tinplate plate.
