Overview
YDX BC60 Thermometric Paper is an irreversible Thermometric Paper with Pressure sensitive adhesive, which belongs to the single temperature multi-color series, with a specification of 2x2cm/piece. When the temperature exceeds 60 ° C, it will turn into red, black, green, yellow and other Colors, with a protective film on the surface, which is often used for temperature tracking of equipment in the railway industry.
Features
1. Irreversible Thermometric Paper, only one temperature point (60 ℃)
2. After overheating, it becomes a variety of Colors (Red, Black, Green, Yellow, etc.)
3. A protective film is attached to the surface
4. Pressure sensitive adhesive, easy to paste
5. Specifications are 2x2cm/piece, round shape
6. Encasement specification is 72 pieces/sheet
Principle
When Thermometric Paper is exposed to an environment above the set temperature (60 ° C), its temperature-sensing material undergoes irreversible chemical changes, causing Color to permanently change to Red, Black, Green, Yellow and other Colors, thus recording the highest temperature.
Applications
Railway industry equipment temperature tracking
Steps
1. Keep the temperature measurement part flat, clean and drying. It is recommended to use sandpaper to remove the oxidation layer or concave and convex surface, or use suitable solvents such as gasoline to clean
2. Uncover after bending the Thermometric Paper (if you are not skilled, you can use a knife to shovel along the side of the backing paper)
3. Press the Thermometric Paper hard to eliminate the air gap and ensure that it is firmly pasted
4. If you need to stick it on the part that may be stained with oil or water, you should use the Miscellaneous series temperature measuring patch with protective film
5. In particularly harsh environments, it is recommended to wrap large pieces of scotch tape for protection and fixation
Notice
• Ensure that the temperature measurement part is flat, clean and drying before pasting
• If it is difficult to remove Thermometric Paper, a knife can be used to assist
• When pasting, it needs to be pressed firmly to remove the air gap.
• Miscellaneous products with protective film should be selected for oil-water environment
• In harsh environments, it is recommended to use additional scotch tape for protection and fixing
