Adopt stainless steel liner and microcomputer intelligent temperature control system, Temperature range RT + 5~ 100 ℃, Temperature Fluctuation +/- 0.5 ℃, with timing function and over-temperature water cut-off alarm.
Three independent water Tanks can be equipped with temperature control, Temperature range RT + 5~ 99 ℃, imported Sensor and tracking alarm function to ensure the safety and reliability of the experimental process.
Using a sink structure, the maximum aperture of 12 cm, four circles per hole cover, heating tube placed in water to achieve rapid heating, Temperature range RT + to 100 ℃, temperature fluctuation +/- 1 ℃, Total Power 900W.
Using platinum sheet material, Conductivity Detector cell constant is 10, suitable for high conductivity environment water measurement, equipped with three core socket interface, no temperature compensation design.
The three-box structure design is adopted, the test sample is still in the test area, the temperature recovery time is ≤ 5min, and the conversion time is ≤ 10s. It has three test functions of high temperature, low temperature and Thermal Shock, meeting a variety of standard requirements.
Temperature range -10~ 70 ℃, Humidity Control Range 40~ 95% RH, using imported Sensor and microcomputer controller, with independent temperature limit alarm system, can be equipped with RS485 interface and test hole.
Temperature range 15~ 45 ℃, Humidity control 60~ 85% R.H., with independent temperature limit alarm and optional test hole, to ensure the safety and convenient operation of the experiment.
Imported Humidity Sensor and Compressor, temperature control accuracy of +/- 0.5 ℃, humidity deviation +/- 3% RH, equipped with independent temperature limit alarm system and test hole to ensure the safety and reliability of the experiment.
Tack testing to assess adhesion by measurement of displacement or peeling time under specified weight. With thermostatic test chamber, multi-national standards are supported and the operation process is clear.
Adopt equilibrate control method, temperature control accuracy +/- 1.0 ℃, Humidity deviation +/- 3% RH, with independent temperature limit alarm system, the box with test hole is easy to operate, to ensure the safety and reliability of the experiment.
The three-box structure is used to achieve independent temperature control in the high temperature zone, low temperature zone and test zone, with a temperature conversion time of less than or equal to 10 seconds. It is equipped with rigid polyurethane foam insulation materials and supports 2 or 3 boxes of Impact mode to meet different standard testing requirements.
The three-box heat storage and cold storage structure is adopted to achieve rapid temperature conversion of ≤ 10s, and the temperature recovery time is ≤ 5 minutes. It supports Impact testing at 150 ° C in high temperature zone and -40 ° C in low temperature zone, and has program memory and Linear dispersion recording functions.
Adopt TMHM equilibrating Conditioning method, temperature control accuracy up to +/- 0.5 ℃, equipped with imported Humidity Sensor and independent temperature limit alarm system, 25mm test hole on the left for easy operation.
Adopt three-box heat storage and cold storage structure, temperature conversion time ≤ 10 seconds, Temperature range -65 ℃~ + 150 ℃, with independent temperature control functions in high temperature zone, low temperature zone and test zone, and can perform 2-box or 3-box Impact mode.
Sensor imported, temperature control accuracy of +/- 0.5 ℃, Humidity deviation of +/- 3% RH, equipped with independent temperature limit alarm system and test hole, to ensure safe and stable operation of the experiment.
