The single-arm double-column structure is used to realize the free drop of the face corner, and the height tracking system is equipped to make the drop height error not exceed 2%. The buffer device improves the service life and safety of the equipment.
The single-arm double-column structure is equipped with an electric lifting device, with a drop height range of 300-1500mm, a test load of 0-80kg, and a buffer device to improve service life and stability. The height error does not exceed 2%.
With four test modes and automatic programming function, the maximum Measured value 1000N, speed range 10-800mm/min, equipped with limit protection and force holding function, support pull and break stop and set force value round-trip movement.
It adopts double guide rod structure, is equipped with dual screen display and the interface can be flipped 180 degrees. It supports pull-and-break stop, force value maintenance and set force value round-trip movement, can store 200 sets of data and automatically calculate statistical values.
Adopt stepper motor and High Accuracy encoder to ensure mechanical stability and High Accuracy, with force value maintenance, set force value round-trip motion and pull and break stop function, support four test modes and fully automatic programming, equipped with 7-inch Touchscreen and host computer software for Data analysis.
Adopt built-in double column structure, support 500N maximum load and 0-500mm/min stepless speed regulation, with force holding function, four test modes and automatic counting Timing function, equipped with limit protection device to ensure safe operation.
Silicone oil standard solution, calibrated viscosity 380cp, capacity 400ml, suitable for Viscometer calibrating.
The data collection process is realized by single chip microcomputer control, with automatic search function to match the best rotor and Rotation speed, Measurement accuracy of +/- 5% F.S, repRoducibility of +/- 1% F.S., support 6/12/30/60rpm multi-Rotation speed selection.
High Accuracy Screw is built into the painted aluminum extrusion sealing plate, the data collection and operation speed of the measurement and control system is fast, the force value Precision is better than +/- 1.0%, and the Test speed range is adjustable from 50~ 500mm/min.
Adopting four-rail column and double ball screw structure, the Force Indication Error ≤ +/- 0.5%, supports various test modes such as fixed height force measurement value, and has automatic transmission and overload protection functions.
Using four-rail column and double ball screw pair structure, the force Indication Error ≤ +/- 0.5%, the displacement accuracy ≤ +/- 0.05mm, supports a variety of test modes and real-time data display, and has overload protection and automatic storage functions.
Using four-rail column and double ball screw pair structure, the force Indication Error ≤ +/- 0.5%, the displacement accuracy ≤ +/- 0.05mm, support a variety of test modes including tensile compression and bending test, with automatic transmission and overload protection function.
Measurement range of 200kg force value and +/- 0.1N Precision, support for tensile, compression and other test modes, effective Travel 700mm, suitable for material development and quality control.
Measurement range of 600kg, Precision +/- 0.01N, Test speed 0~ 500mm/min, Support a variety of Unit switching and specimen breakpoint sensing to ensure Test accuracy and safety.
Measurement range 1000kg, Test speed 0~ 500mm/min, with upper and lower limit safety settings and specimen breakpoint sensing, support a variety of force values and stress Unit switching.
