Stainless steel material ensures durability, wet film thickness range of 300-600μm, accuracy +/- 4μm, suitable for low viscosity liquid Spreader, can be combined with Automatic Film Applicator to achieve uniform Spreader.
Stainless steel material to ensure durability, wet film thickness 30-120μm optional, accuracy +/- 2μm, application width 60mm, can be used with Automatic Film Applicator.
Using stainless steel 1Cr17N2 material, wet film thickness 50-200μm adjustable, accuracy +/- 3μm, application width 60mm, suitable for low viscosity liquid Spreader, can be used with Automatic Film Applicator.
4-Sided frame design, provide 30/50/75/100μm variety of film thickness selection, application width 80mm, stainless steel corrosion resistance, in line with GB/T 1727 standard, to ensure uniform film.
A set of three can cover 30-400μm wet film thickness range, application width 80mm, stainless steel corrosion resistance, in line with GB/T 1727 standard.
The 4-sided coating Applicator can be prepative of four wet film thicknesses, the conversion angle is easy to operate, the accuracy is +/- 3μm, the stainless steel material is resistant to acid and alkali erosion, and the application width is 80mm.
Moulding accuracy, small size, can be prepared 12 kinds of wet film thickness, range 30-600μm, Spreader width is not less than 60mm, especially in the Moulding process Coating does not spill.
4-Sided wet-film Spreader design, application width 160mm, accuracy +/- 2μm, high Hardness stainless steel material, Hardness 50~ 55HRC, to ensure experimental accuracy and durability.
The 4-sided structure can prepare 12 kinds of film thickness, the wet film thickness range is 30-100μm, the accuracy is +/- 2μm, the application width is not less than 60mm, and the coating does not spill during the Moulding process.
Using a set of 3 designs can be prepared for 12 kinds of film thickness, wet film thickness range of 30-600μm, Moulding process Coating does not spill, suitable for a variety of substrate surface Spreader.
Effective Spreader width 100mm, wet film thickness up to 600μm, high-quality wear-resistant corrosion-resistant alloy steel material, support manual film or with automatic Film Applicator to ensure good conformity Repeatability coating.
The device can be prepared with 12 wet film thicknesses, ranging from 30-600μm, accuracy up to +/- 002-0.012 mm, 4-sided design to ensure that the coating does not spill, suitable for a variety of substrate surface Spreaders.
Wire-wound structure ensures 0.1 micron High Accuracy, wet film thickness 50.3 μm, stainless steel material is durable and easy to clean, and the wide-Rod Film Applicator achieves uniform coating.
Spreader width 100mm, wet film thickness 37.5μm, wear-resistant corrosion-resistant alloy steel material, can be used manually or with automatic Film Applicator to ensure coating conformity and Repeatability.
The wet film thickness can be adjusted in increments of 10 μm from 2 μm, the maximum application width is 300mm, and the precision wear-resistant stainless steel blade and anodic oxidation aluminum frame are used.
