Using eddy current sensing principle and probe probe design, especially suitable for small size and profiled material measurement; Measurement range 0-1500 μm, resolution up to 0.1 μm, repeatability error ≤ +/- （ 0.8% reading + 0.1 μm), support multi-point calibrating and data statistics function.
Made of titanium and aluminum, equipped with stainless steel cutters and LED lighting Microscope, Measurement range 20-2000μm, unique swirl/spin system includes multiple cutters for precise measurement of Coating thickness and evaluation of substrate defects.
Using probe probe design, especially suitable for small size and special-shaped material measurement; Range 0-1500 μm, Repeatability up to 0.1 μm; Digital signal processing strong anti-interference, to ensure stable and accurate data.
With iron-based and non-iron-based dual-use function, resolution up to 0.1um, test range 0~ 1250um, support single and continuous measurement, automatic identification of matrix material, stable and portable operation.
Probe surface with wear-resistant aluminum alloy, braided cable to adapt to high temperature rough surface, resolution up to 0.1 μm, support split remote measurement, can store 2500 readings.
Measurable Film thickness 0.4-8 mm, accuracy 0.5HW, mechanical compression spring design durable, high toughness table glass anti-Impact, support a variety of Hardness value conversion, suitable for soft metals such as aluminum alloy.
Supports iron-based and non-iron-based material measurement with accuracy of +/- 1~ 3% or +/- 2.5 µm, provides split Probe for enhanced maneuverability, automatically recognizes matrix materials and remembers calibrated values.
The eddy Current principle is used for measurement of nonconductive coatings on non-ferrous metal substrates, with a thickness range of 0~ 625μm and an error of +/- 3%. It has IP65 Protection Rating and fast measurement capabilities of more than 60 readings per minute.
Measurement range 2-200μm with four stainless steel blades, LED display mirror and unique swirl/spin cutting system for accurate measurement of Coating thickness and evaluation of substrate defects.
With low temperature OLED display, it can still work normally in -40 ℃ environment; equipped with iron-aluminum dual-use Probe, automatically identify the substrate and convert the mode; Measurement speed is as fast as 0.5 seconds, error range +/- 3%.
Using 90 ° Measurement Angles and eddy Current principles, accurate measurement of edge coatings, narrow tube coatings and small surface areas ensures stable and reliable measurement on complex geometries.
Measurement range 1.0-245 mm, error +/- (0.5% H + 0.1) mm, with backlight display and sound speed back measurement function, support a variety of materials Film thickness measurement.
It can measure the minimum inner diaMeter of 6mm aluminum tube and 8mm thickness profile, Indication Error 0.5HW, using high strength pointer and special steel pressure needle, support Hardness value multi-standard conversion.
Measurement range 0-100HBa, Film thickness can be measured as low as 1mm, no need to support the sample, Sensitivity is high, suitable for ultra-thick workpieces and assembly parts.
The gap height is adjustable from 0 to 3000μm, the minimum scale is 5μm, and the aluminum alloy material can be completely disassembled and cleaned by anode treatment. It is suitable for Drawdown Vacuum Plate, Glass plate and other solid substrate film preparations.
