The use of PTFE oxygen permeable membrane to ensure oxygen permeability, spiral cap design for easy installation and electrolysis filling, suitable for Portable dissolved oxygen measurement equipment maintenance.
PTFE oxygen permeable membrane ensures oxygen permeability, ABS plastic material enhances durability, screw cap design simplifies installation process, suitable for long-term water quality monitoring applications.
Using triple ceramic dialysis membrane and LT Glass Sensor membrane, Measurement range 0.00~ 12pH, support -5~ 70 ℃ sample temperature measurement, built-in temperature sensor to achieve automatic compensation, Bluetooth connection for data transmission.
The device can precisely control the film thickness of the ink layer of the color strip, and the ink injection amount is 0.0012g, which is used for ink contrast and color concentration detection.
The Spin Coater is controlled by touch screen, the acceleration range is 100~ 4000rpm/s, and the speed can be automatically corrected by A/K selection. The motor torque is large and the operation is smooth, which is suitable for the assembly line process.
Using PTFE oxygen permeable membrane, the probe cathode and anode are isolated from the sample, and oxygen passes through the membrane and acts with the polarographic system to generate current to ensure accurate and reliable measurement.
The mechanical compression spring device is not easy to damage, the accuracy is up to 0.5HW, the film thickness 0.4-6 mm workpiece can be detected, and various Hardness values such as Brinell Rockwell can be obtained through the conversion table.
Using high density polyethylene (PE) oxygen permeable membrane to achieve efficient oxygen diffusion, equipped with ABS plastic screw cap structure for easy installation and electrolysis filling, and interact with the current system for accurate measurement of dissolved oxygen concentration.
The minimum measurable inner diaMeter is 10mm, the maximum sample thickness is 6mm, and the imported special steel crimp and high-strength pointer components are used. It has good Stability and portability and supports Hardness value conversion.
Using film heating and PID intelligent temperature control technology, the temperature control accuracy is up to +/- 0.3 ° C, the temperature uniformity is less than or equal to +/- 0.5 ° C, and the automatic preheating and power failure recovery functions are supported.
Measurement range 0-10mm, accuracy ≤ 0.02mm, Graduation 0.01mm, pressure 22kPa +/- 2kPa, upper probe diaMeter < 10mm plane, simple and reliable structure, handheld and Benchtop two specifications.
Fillable internal reference solution design with circular Glass sensitive membrane and annular ceramic liquid junction for low Conductivity Detector samples ensures measurement Stability and accuracy.
Using 500mm scale conduit and 12.7mm steel ball punch Rod, weight 500g, impact test to evaluate the material anti-perforation performance, easy to operate and stable structure.
Adopt 3-in-1 composite structure integrated temperature sensor, Round Glass sensitive membrane to ensure full induction, Fiber liquid interface provides stable measurement, Measurement range 0~ 14pH, equipped with 1 Meter BNC cable.
Glass shell and sensitive membrane, pH Measurement range 0-14pH, Temperature range 5-60 ℃, suitable for routine sample measurement, liquid boundary is ceramic core single salt bridge, reference type Ag/AgCl.
