The guide rail type is easy to operate, the positioning pin ensures accuracy, the pressing device reduces errors, the sampling thickness is less than 1.0mm, the parallelism is less than 0.1mm, and a variety of standard samples can be cut.
Conductivity Detector measurement principle, measurement range 0-80%, resolution 0.1%, Response Time 1 second, with temperature and humidity compensation and backlight display, easy to quickly detect on site.
The maximum load is 5KN, and the precision structure design is adopted to ensure stable clamping during testing. It is suitable for a variety of material testing requirements, and is easy to operate and durable.
Suitable for materials such as high Hardness rubber and engineering plastics, pressing needle Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, in line with ASTM D 2240-05 and GB/T2411-2008 standards.
Using the 4-pin scribing needle specification R0.25/0.5/1.0/1 mm, by moving at a constant speed on the coating, the trajectory change from width to narrower to depth to shallower can be measured.
Using platinum plate method measurement, accuracy of 0.1mN/m, equipped with 7-inch Touchscreen and electronic level, support automatic lifting and data management, to ensure stable and reliable measurement.
Portable design volume 145 * 52 * 23mm, support 100 sets of data storage and automatic calculation, with upper and lower limit alarm and USB communication functions, relative Indication Error only 0.5%, suitable for a variety of force value unit switching.
The ring method is adopted, the resolution reaches 0.1mN/m, supports automatic stop and average calculation, and is equipped with 24-bit AD converter and LVDT displacement Sensor to ensure Test accuracy and Repeatability.
Ring test and reference material correction, resolution 0.01mN/m, equipped with 24-bit AD converter and LVDT displacement Sensor, support automatic stop and averaging functions to ensure test Linearity and repeability accuracy.
Double pointer design for easy reading, Pin Travel 0~ 2.5mm, Measurement range 0~ 100HD, error +/- 1HD, lightweight and portable only 0.16kg, suitable for on-site Hardness detection.
With 4.3-inch Touchscreen operation, the electromagnetic force equilibrating Sensor ensures high Sensitivity and 0.1mN/m accuracy, supports platinum plate method and ring method dual mode, fully automatic measurement direct display results, in line with many international standards.
Supporting D-type Shore DuroMeter, applying 5kg test force by weight, equipped with Glass bench and adjusting nut to ensure full contact with the sample and improve measurement Stability.
High Accuracy measurement with 0.5% Relative Indication Error and 0.005N Graduation, supports gravity acceleration setting, upper and lower limit alarm, data storage analysis and USB communication functions to meet a variety of industrial testing needs.
Laser Sensor is used to directly measure the natural vibration frequency of the belt. The size of the split probe is only 124 * 21 * 12mm, which can penetrate into the depth of 66mm. Measurement range is 10-500Hz, and it supports metric and imperial unit switching.
Using electromagnetic force equilibrating Sensor, accuracy of 0.01mN/m, support platinum plate and platinum ring method, automatic measurement without calculation, real-time display Linear dispersion and save the results.
