Adopting the principle of vertical drop of steel balls, the diaMeter of steel balls is 8mm, and the distance between upper and lower grooves is 250mm, which is suitable for the viscosity measurement of high viscosity transparent liquids.
Adopting the principle of rolling timing of the ball by inclined columnar measurement tube, the viscosity range 0.5-1000 00mPa · s, Temperature range -20 ℃ to 120 ℃, Repeatability is better than 0.5%, and the sample sealing measurement has no external interference.
Using R2.5mm steel ball to apply 20N pressure, test at standard temperature for 60 minutes and then evaluate the thermal deformation performance of the material through measurement of Crane diaMeter, which is suitable for testing of various electrical components.
Equipped with three replaceable spindles, plate spindle measurement 0-22 poise fluid, small ball spindle coverage 0-350 poise range, large ball spindle suitable for 0-75 poise range, to meet the testing needs of different viscosity samples.
It adopts copper ring and steel ball structure, supports 2-3.55 gram steel ball configuration, and accurately determines the softening temperature of the material through the drop distance of 25.4 mm, which is suitable for all kinds of asphalt experiment needs.
Equipped with three replaceable spindles, covering 0-350 poise wide range, plate spindle accuracy of 0-22 poise, ball spindle supports 0-75 poise and 0-350 poise measurement respectively
The equipment tests the initial Tack by short contact between steel ball and adhesive tape sample at a small pressure, adjustable tilt angle 0~ 60 °, rolling ball range 1/32 inch to 1 inch, suitable for a variety of material adhesion evaluation.
It can automatically measure the dynamic and Static COF at the same time, and the total error of the force measurement system is less than +/- 2%. It adopts high-precision ball screw drive, stable performance, accurate test and convenient operation.
Provide plate and two ball spindles, covering 0-350P viscosity measurement range, plate spindle for 0-22P fluid, ball spindle covering 0-75P and 0-350P measurement.
It can automatically measure the dynamic and static COF at the same time, with a force measurement range of 0~ 5N, using high-precision ball screw drive, and equipped with a micro-printer to print multiple sets of results and averages.
The line pressure range is 0.33~ 80N/mm, and the width of the pressing roller is 300mm, which can complete ordinary pressing, high-pressure pressing, smooth pressing and calendering experiments, and support a variety of blanket pressing tests.
Using high-precision ball screw drive, the total error of the force measurement system is less than +/- 2%, and the dynamic and static COF can be automatically measured at the same time. The micro-printer can print multiple sets of results and the average value.
Adapt to a variety of Viscometer use, suitable for factory field applications, real-time printing measurement results, no need to hand copy, easy operation, can save labor time.
The pressure column and ball joint structure are used to ensure that the test surface is close, the pressure column mass is 250g, the bottom surface diaMeter is Φ 50 +/- 1mm, and it is equipped with 100g to 500g weight, which can simulate the contact performance of coatings under different pressure conditions.
Using high elasticity standard rubber and denim for extrusion test, extrusion pressure 10-120kgf adjustable, Test speed 5-30 times/minute, to meet the requirements of YD/1539-2006 standard.
